Dear all
I need help with a LOGIC 3 ultrasound scanner, ineed to diagnostic the exact bad part, The problem is that the scanner suddenly gets hanged with no other way tu tourn of an then on, any help please will be apreciate
thanks beforehand
Check the error logs. use ALT D to dump the log files to disk or flash drive. There is a lot of info in the logs, but it might help. Most issues are in the BEP, Back End Processor, the PC inside that runs the unit. Power supply, hard drive, and software are most likely the problem./ Bill Ward
We work with hospitals providing reliable ultrasound systems, probes & parts. By offering sales, service, rentals & repairs, we help our clients access high quality imaging systems while keeping costs low & support simple. Please call 760-834-4777!
Ruben Cadima
LOGIC 3 problem
February 02, 2011 03:46
Dear all
I need help with a LOGIC 3 ultrasound scanner, ineed to diagnostic the exact bad part, The problem is that the scanner suddenly gets hanged with no other way tu tourn of an then on, any help please will be apreciate
thanks beforehand
to rate and post a comment
Bill Ward
Re: LOGIC 3 problem
February 03, 2011 04:33
Check the error logs. use ALT D to dump the log files to disk or flash drive. There is a lot of info in the logs, but it might help. Most issues are in the BEP, Back End Processor, the PC inside that runs the unit. Power supply, hard drive, and software are most likely the problem./ Bill Ward
to rate and post a comment