Hello,I am spanish tecnical and have a problem.
First I indicate the symptoms:
- when you ignite the machine the logo appears and puts running memory test:sucess.
- it loads two of the bars and it can only blocked, (without stopping to enter the menu of setup not nothing).
Today I did my first diagnosis of the machine, I have the manual of sevice. And since he was thinking that I was going away to stopping to do the test of the system from the menu of setup I did not think about the option to series connect it to a laptop across the port. The technical personnel of Ge proved it and diagnosed him that it could be of the hard disk or of the plate mother of the cpu (since it indicates gilrubio) .Al it looks like other one technician verified the hard disk (making other one equal or something like that) and he said that it had to be an insurance of the plate mother of the cpu, and q not podia to obtain other one. I before the doubt and since not very well q have that Mother extracts the plate and I brought myself to my workshop. Since podria to solve the problem of effective form? Since I do a test to him with a laptop for the port series? Thank you in advance.
You have a problem with the battery on the CPU board!
Establish a connection with your PC using HyperTerminal and enter the command:
ld 0.0/MSTPRG/BRST.LO and enter
Type st
Then follow the procedure on your PC ( Setting the date, time, serial number, video output, ...)
I am sure you will after this everything will be ok :-)
I verified the battery and it is exhausted, the mainspring will be this? When it puts the new battery and returns to introduce the plate in the machine ... I have to connect with the PC to form for the port com or have to do it before? The hyperterminal, is it a software for windows? Thank you in advance
I verified the battery and it is exhausted, the mainspring will be this? When it puts the new battery and returns to introduce the plate in the machine ... I have to connect with the PC to form for the port com or have to do it before? The hyperterminal, is it a software for windows? Thank you in advance
very thanks.How verify the cpu board?I wanna know how diagnostic the machine,how comunicate my laptop with the machine for serial? port.(Bus,software,protocol..etc)
Hi,Alfredo Jose,I am from Colombia and I am engineer electronics my speciality is in medical equipmens,I think that the solution is formating the hard disk,I can help you,my email is
juantonita@yahoo.es
Regards,Juan Restrepo
DirectMed Imaging specializes in Equipment Sales, Parts, and Support. Parts are in stock and available for immediate delivery. In-room MRI Upgrades are available now. (855) 463-3727 or sales@directmedimaging.com
Alfredo José Martinez Perales
LOGIC 400 cl
February 27, 2012 08:41
Hello,I am spanish tecnical and have a problem.
First I indicate the symptoms:
- when you ignite the machine the logo appears and puts running memory test:sucess.
- it loads two of the bars and it can only blocked, (without stopping to enter the menu of setup not nothing).
Today I did my first diagnosis of the machine, I have the manual of sevice. And since he was thinking that I was going away to stopping to do the test of the system from the menu of setup I did not think about the option to series connect it to a laptop across the port. The technical personnel of Ge proved it and diagnosed him that it could be of the hard disk or of the plate mother of the cpu (since it indicates gilrubio) .Al it looks like other one technician verified the hard disk (making other one equal or something like that) and he said that it had to be an insurance of the plate mother of the cpu, and q not podia to obtain other one. I before the doubt and since not very well q have that Mother extracts the plate and I brought myself to my workshop. Since podria to solve the problem of effective form? Since I do a test to him with a laptop for the port series? Thank you in advance.
to rate and post a comment
Muhammad yousaf
Re: LOGIC 400 cl
February 28, 2012 11:14
Sir
Yours machine cpu board is not communicate with your hard disk and machine
so pl verify the cpu board
Muhammad Yousaf Mirza
to rate and post a comment
Josip Vujnovic
Re: LOGIC 400 cl
February 29, 2012 09:11
You have a problem with the battery on the CPU board!
Establish a connection with your PC using HyperTerminal and enter the command:
ld 0.0/MSTPRG/BRST.LO and enter
Type st
Then follow the procedure on your PC ( Setting the date, time, serial number, video output, ...)
I am sure you will after this everything will be ok :-)
Best Regards
to rate and post a comment
Alfredo José Martinez Perales
Re: LOGIC 400 cl
February 29, 2012 06:22
I verified the battery and it is exhausted, the mainspring will be this? When it puts the new battery and returns to introduce the plate in the machine ... I have to connect with the PC to form for the port com or have to do it before? The hyperterminal, is it a software for windows? Thank you in advance
to rate and post a comment
Alfredo José Martinez Perales
Re: LOGIC 400 cl
February 29, 2012 06:22
I verified the battery and it is exhausted, the mainspring will be this? When it puts the new battery and returns to introduce the plate in the machine ... I have to connect with the PC to form for the port com or have to do it before? The hyperterminal, is it a software for windows? Thank you in advance
to rate and post a comment
Alfredo José Martinez Perales
Re: LOGIC 400 cl
February 29, 2012 09:12
very thanks.How verify the cpu board?I wanna know how diagnostic the machine,how comunicate my laptop with the machine for serial? port.(Bus,software,protocol..etc)
to rate and post a comment
Muhammad yousaf
Re: LOGIC 400 cl
February 29, 2012 09:11
Sir
Yours machine cpu board is not communicate with your hard disk and machine
so pl verify the cpu board
Muhammad Yousaf Mirza
to rate and post a comment
Juan Antonio Restrepo Herrera
Re: LOGIC 400 cl
February 29, 2012 10:10
Hi,Alfredo Jose,I am from Colombia and I am engineer electronics my speciality is in medical equipmens,I think that the solution is formating the hard disk,I can help you,my email is
juantonita@yahoo.es
Regards,Juan Restrepo
to rate and post a comment
Ricardo A. Sanchez
Re: LOGIC 400 cl
March 25, 2012 11:08
Hi Alfredo, were you able to fix the problem? I'm sure it was the CPU board. Let me know please. Thanks
to rate and post a comment