LOGIQ 200 MST PCB problem...

Hello, Trivedi, good morning! First of all, I must say, GE L200 alpha or Pro are very, very stable and good US systems and I suspect your problem is outside of the equipment. I faced, once, something similar you described and it was a disturbance caused either by VHS, or computer imaging capture or Video Printers. Pernicious electrical currents coming thru video signal or even from the ground wire could be causing this "tied" booting period. Please, check all these incoming singnal from the exterior world, remove them and verify if the L200 runs okay. The disturbance solved to set date and time is easy. Good luck, take care, God Bless!