I have got the same problem since last December 2011 after replacing the time keeper baterie.I am also looking for some one to help me.Dear augustine if you find a solution ,please info me
Connect with the laptop using a serial cable and follow the procedure..
If you throw an error on the CPU battery, start BRST.LO and adjust system parameters
There is Logiq 400 when we power ON the machine 2 bars and on left side show CPU memory test OK and right side show this figures 2195747-2.I need solution.Hope you will give me Kind reply
Please advice me any solution
It looks your cpu time keeper battery is dead and machine has lost its setting, you have to replace the special battery built in with crystal having four legs and reset the system, i have procedure please email me my email is bashir30474@yahoo.com
From preventive maintenance through comprehensive cryogen services, BMI-PMI is your trusted partner for new/reconditioned sales, installation, and service of both facility-based and mobile MRI solutions. www.brownsmedicalimaging.com / 800-701-9729
Augustine Kobla Amenyo
Logiq 400 MD Error.
March 21, 2011 10:40
My Logiq 400MD indicating CPU Memory Test: Success, but hangs and does not boot further.
Please help!!!
Thanks.
Augustine
to rate and post a comment
Ramil Cortes
Re: Logiq 400 MD Error.
March 22, 2011 10:07
its sounds like your hard drive is the problem..kindly check your hardisk & cable connections..
to rate and post a comment
kasongo Mutombo
Re: Logiq 400 MD Error.
March 22, 2011 12:12
I have got the same problem since last December 2011 after replacing the time keeper baterie.I am also looking for some one to help me.Dear augustine if you find a solution ,please info me
to rate and post a comment
Bharat sharma
Re: Logiq 400 MD Error.
March 23, 2011 09:45
chesk the CPU pcb of the machine
100% it is BAD
to rate and post a comment
Josip Vujnovic
Re: Logiq 400 MD Error.
March 24, 2011 09:45
Connect with the laptop using a serial cable and follow the procedure..
If you throw an error on the CPU battery, start BRST.LO and adjust system parameters
to rate and post a comment
Farooq Shah
re: Logiq 400 MD Error.
November 23, 2015 03:47
There is Logiq 400 when we power ON the machine 2 bars and on left side show CPU memory test OK and right side show this figures 2195747-2.I need solution.Hope you will give me Kind reply
Please advice me any solution
to rate and post a comment
bashir ahmad
re: re: Logiq 400 MD Error.
November 24, 2015 04:25
It looks your cpu time keeper battery is dead and machine has lost its setting, you have to replace the special battery built in with crystal having four legs and reset the system, i have procedure please email me my email is bashir30474@yahoo.com
to rate and post a comment