This message appears as part of the normal boot process. This indicates you have a CPU version MVME147SRF.
This message is normal, but if the system is stopping at this point, you have some other problem that is preventing a full boot. If you are technically-inclined, you can connect a laptop to the system and watch the start-up messages. This should help you identify where the system is stopping. If you want more detail on how to do this, please reply on this forum.
hi jason how do i conect the laptop to the 400 and how do i make the check i have another one with this error:
SYS ERROR: SCSI ERROR
DEVICE: 0.0 CODE 20211
Thanks for responding. You will need a computer program called Hyper Terminal (usually found in the Accessories folder under Windows XP and earlier) as well as a serial cable with a null modem adapter. Connect these to the rear of the system.
The second error you posted indicated that your hard drive (SCSI Device 0) has an error. Usually this indicates corrupt software and may require you to purchase a replacement hard drive.
I have the message of cpu memory test : success
and the logiq 400 md is hang. i connected the rs 232 cable and the message is
*** VENUS SYSTEM RESET/START ***
*** BBRAM contents are corrupted ***
i want to load the system time and date. pls help me to service the logiq 400
You have a problem with the Timekeeper! Connect the laptop and type: ld MSTPRG / BRST.LO and press enter write: st and press enter Follow the instructions on the screen (year, month, hour, minute, system ID, the video output .. Best Regards
hello I have the same problem change the battery of the computer and I get CPU BATTERY SUCCESS, the steps above the entry on a computer? . and declare the video output? thanks for the help you can provide me the following is my email vlopeztoledo@prodigy.net.mx
hello I have the same problem change the battery of the computer and I get CPU BATTERY SUCCESS, the steps above the entry on a computer? . and declare the video output? thanks for the help you can provide me the following is my email vlopeztoledo@prodigy.net.mx
We supply high-quality refurbished and used imaging equipment and parts to hospitals, imaging centers, and brokers worldwide. We pay top dollar and offer installation, deinstallation, service, and transport. Se habla español info@medilabglobal.com
rossana diaz
LOGIQ 400 PRO Error Message
April 26, 2007 02:38
IM getting this message on the screen:
MEMORY TEXT: SUCED
and nothing happens does anybody know what does it means? is a Logiq 400 PRO
to rate and post a comment
Manuel Casanova
Re: LOGIQ 400 PRO Error Message
May 02, 2007 09:29
Rossana:
I check the service manual and the error code no appears....are you sure.....
Manuel
to rate and post a comment
rossana diaz
Re: LOGIQ 400 PRO Error Message
May 02, 2007 11:09
sorry i made a imistake the correct is
2136319-4
CPU MEMORY TEST SUSSESS
to rate and post a comment
Jason Munson
Re: LOGIQ 400 PRO Error Message
May 24, 2007 10:36
Rossana,
This message appears as part of the normal boot process. This indicates you have a CPU version MVME147SRF.
This message is normal, but if the system is stopping at this point, you have some other problem that is preventing a full boot. If you are technically-inclined, you can connect a laptop to the system and watch the start-up messages. This should help you identify where the system is stopping. If you want more detail on how to do this, please reply on this forum.
Sincerely,
Jason Munson
Echoserve, LLC
877-386-3246
to rate and post a comment
rossana diaz
Re: LOGIQ 400 PRO Error Message
June 15, 2007 05:26
hi jason how do i conect the laptop to the 400 and how do i make the check i have another one with this error:
SYS ERROR: SCSI ERROR
DEVICE: 0.0 CODE 20211
any idea?
to rate and post a comment
Jason Munson
Re: LOGIQ 400 PRO Error Message
June 15, 2007 06:44
Rossana,
Thanks for responding. You will need a computer program called Hyper Terminal (usually found in the Accessories folder under Windows XP and earlier) as well as a serial cable with a null modem adapter. Connect these to the rear of the system.
The second error you posted indicated that your hard drive (SCSI Device 0) has an error. Usually this indicates corrupt software and may require you to purchase a replacement hard drive.
Sincerely,
Jason Munson
Echoserve, LLC
to rate and post a comment
G.SENTHIL KUMAR
re: Re: LOGIQ 400 PRO Error Message
May 28, 2012 11:06
Jason
I have the message of cpu memory test : success
and the logiq 400 md is hang. i connected the rs 232 cable and the message is
*** VENUS SYSTEM RESET/START ***
*** BBRAM contents are corrupted ***
i want to load the system time and date. pls help me to service the logiq 400
to rate and post a comment
Josip Vujnovic
re: re: Re: LOGIQ 400 PRO Error Message
June 04, 2012 07:25
You have a problem with the Timekeeper! Connect the laptop and type: ld MSTPRG / BRST.LO and press enter write: st and press enter Follow the instructions on the screen (year, month, hour, minute, system ID, the video output .. Best Regards
to rate and post a comment
vicente lopez
re: re: re: Re: LOGIQ 400 PRO Error Message
August 05, 2012 11:10
vicente lopez
hello I have the same problem change the battery of the computer and I get CPU BATTERY SUCCESS, the steps above the entry on a computer? . and declare the video output? thanks for the help you can provide me the following is my email vlopeztoledo@prodigy.net.mx
to rate and post a comment
vicente lopez
re: re: re: Re: LOGIQ 400 PRO Error Message
August 05, 2012 11:10
vicente lopez
hello I have the same problem change the battery of the computer and I get CPU BATTERY SUCCESS, the steps above the entry on a computer? . and declare the video output? thanks for the help you can provide me the following is my email vlopeztoledo@prodigy.net.mx
to rate and post a comment
Stefano Angelone
re: re: re: Re: LOGIQ 400 PRO Error Message
November 14, 2012 10:14
hi, i'm stefano and have these prblem:
when i type : id mstprg / brst.lo etc..
appear a message " id: not found"
????????
help please
to rate and post a comment
xray
re: re: re: re: Re: LOGIQ 400 PRO Error Message
November 14, 2012 03:49
wrong!
type : ld MSTPRG/BRST.LO (LD lowercase ,MSTPRG/BRST.LO with big letters)
BR
to rate and post a comment
Stefano Angelone
re: re: re: re: re: Re: LOGIQ 400 PRO Error Message
November 21, 2012 12:37
tank's all ok! on logiq 400 md. but i have to try on logiq 400 pro and this procedure not work. why? tank you tank you for 400md
to rate and post a comment