I'm a problem with the doppler on logiq 500. The equipment is fuctioning normaly but the function "doppler" not trace the spectro and dont have audio doppler. A line blue sliding to the screen but the equipment dont trace the spectro and dont have audio doppler.
Anybody can help me? Whats the board with defect?
Thanks
Raphael Cortez
I make the test through the function "Diagnostic" on SETUP selection.
Appears 2 errors.
Beam Former Test1 ---------- "Failed"
Doppler Test1 --------------" Failed"
dear sir:
i have the service manual of logiq 500. including troubleshooting,particular electronic schematics. i think if you have the service manual. you can service the machine sucess.if you need please contact me.
I know it can be download from GE WEB,but ge only privode the basic service manual. but i have the advanced service manual,it has particular circult schematics.if you have the advanced service manual ,you can troubleshooting all problems and repair the circult board.
Dear Yuan Bo
First, I have a Logiq 500 pro .the problem is: in b/w mode AT THE TOP QUARTER OF IMAGE ,I have many poor image so we couldn't see tissues very well. what is that? will u help me./VARIATION OF FOCUSING , DEPTH AND GAIN DON'T HAVE ANY EFFECT.OFF COURSE sometimes when I turn on the machine in morning ,it works correct. and if I change probe or after a while it become bad.
second,can u plz send me the file of your service manual.
thnks
Esmaeil
DirectMed Imaging specializes in Equipment Sales, Parts, and Support. Parts are in stock and available for immediate delivery. In-room MRI Upgrades are available now. (855) 463-3727 or sales@directmedimaging.com
Raphael Cortez
Logiq 500 Doppler Problem
January 09, 2008 01:57
Hello friends,
I'm a problem with the doppler on logiq 500. The equipment is fuctioning normaly but the function "doppler" not trace the spectro and dont have audio doppler. A line blue sliding to the screen but the equipment dont trace the spectro and dont have audio doppler.
Anybody can help me? Whats the board with defect?
Thanks
Raphael Cortez
to rate and post a comment
Lakshmi Narayana
Re: Logiq 500 Doppler Problem
January 09, 2008 06:39
Is this problem in CW or PW?
to rate and post a comment
Raphael Cortez
Re: Logiq 500 Doppler Problem
January 14, 2008 08:31
Hello LAKSHMI,
The problem is on PW. Can you tell me where is the defect? Whats probably board with defect?
Thanks in advanced
Raphael
to rate and post a comment
Raphael Cortez
Re: Logiq 500 Doppler Problem
January 14, 2008 10:09
Hello LAKSHMI,
I make the test through the function "Diagnostic" on SETUP selection.
Appears 2 errors.
Beam Former Test1 ---------- "Failed"
Doppler Test1 --------------" Failed"
Can you help me?
Thanks in advanced.
to rate and post a comment
Rosa Lopez
re: Re: Logiq 500 Doppler Problem
September 11, 2013 05:47
Hello Raphael,
I know this was a old message but we've having a similar problem -- Test1 failed -- how did you solve it?
to rate and post a comment
Raphael Cortez
Re: Logiq 500 Doppler Problem
January 18, 2008 07:31
Hello,
Please, I need your help. Tell me whats wrong with the board.
Thanks in advance.
Raphael Cortez
to rate and post a comment
yuan bo
Re: Logiq 500 Doppler Problem
January 10, 2008 07:40
dear sir:
i have the service manual of logiq 500. including troubleshooting,particular electronic schematics. i think if you have the service manual. you can service the machine sucess.if you need please contact me.
to rate and post a comment
Re: Logiq 500 Doppler Problem
January 19, 2008 08:15
GE provides their manuals online free of charge .
http://apps.gehealthcare.com/servlet/ClientServlet?REQ=RNEW&MODALITY=US
to rate and post a comment
yuan bo
Re: Logiq 500 Doppler Problem
January 20, 2008 02:38
dear sir:
I know it can be download from GE WEB,but ge only privode the basic service manual. but i have the advanced service manual,it has particular circult schematics.if you have the advanced service manual ,you can troubleshooting all problems and repair the circult board.
to rate and post a comment
wael adis
Re: Logiq 500 Doppler Problem
October 07, 2011 05:22
dear sir i need the schematic manual and service manual if you can send it to me at my mail adiswp@yahoo.com
thanks a lot
to rate and post a comment
esmaeil ebrahimi
re: Re: Logiq 500 Doppler Problem
September 17, 2013 08:36
Dear Yuan Bo
First, I have a Logiq 500 pro .the problem is: in b/w mode AT THE TOP QUARTER OF IMAGE ,I have many poor image so we couldn't see tissues very well. what is that? will u help me./VARIATION OF FOCUSING , DEPTH AND GAIN DON'T HAVE ANY EFFECT.OFF COURSE sometimes when I turn on the machine in morning ,it works correct. and if I change probe or after a while it become bad.
second,can u plz send me the file of your service manual.
thnks
Esmaeil
to rate and post a comment