We have a problem in logiq 700 that the machine does not boot up, during start up last message appears on status bar is( checking partition... verified) after that machine became stuck...
Please guide us how to rectify the above mentioned problem and also guide us how to set the time and date command in case of time keeper battery goes down...?
It seems that system is unable to load operating system.
Do perform following step:
1) try to install fresh application software, problem should be solved, if system is unable to perform this installation then you have corrupted hard disk.
Therapeutic Technologies closeout auctions take place on DOTmed.com. Bid today on 538 lots of medical equipment. Inspections may be done by appointment. Hours are Monday through Friday 9am-4pm Contact chrisnuytens1@gmail.com to schedule.
Nadeem Siddiqui
Logiq 700
June 05, 2014 03:55
We have a problem in logiq 700 that the machine does not boot up, during start up last message appears on status bar is( checking partition... verified) after that machine became stuck...
Please guide us how to rectify the above mentioned problem and also guide us how to set the time and date command in case of time keeper battery goes down...?
Thanks and best regards,
Nadeem Siddiqui.
to rate and post a comment
Kamran Butt
re: Logiq 700
June 06, 2014 08:42
It seems that system is unable to load operating system.
Do perform following step:
1) try to install fresh application software, problem should be solved, if system is unable to perform this installation then you have corrupted hard disk.
to rate and post a comment