Dear friends!
I have a problem with Logiq P6.
During the software loading the blue bar at the bootom of the screen reaches the end of line and then stops - working screen is not loading. And there is no lighting at all keyboard buttons.
I can see this words at log file:
Downloading LSW from file: C:/Arirang/target/bin/rfitr.out
error ; ScAcquisition(0xA4); *** RfiComm::Start failed (2)
error ; ScAcquisition(0xA4); RfiComm::Start F A I L E D
debug ; ScAcquisition(0xA4); loadprogram(C:/Arirang/target/bin/rfitr.out) failed!
I have changed the hard drive and completely reloaded the software. At this day Logiq worked perfect: no loading fails and no errors.
But at the next day it could not load again, and I see again at log-file: RfiComm::Start failed.
Medical Equipment Superstore closeout auctions take place on DOTmed.com. Bid today on 276 lots of medical equipment. Items can be inspected in person or via video call. Contact Rick at +1 (215) 669-3913 or info@medicalequipmentsuperstore.com
MatLo
Logiq P6 loading problem
October 28, 2015 08:58
Dear friends!
I have a problem with Logiq P6.
During the software loading the blue bar at the bootom of the screen reaches the end of line and then stops - working screen is not loading. And there is no lighting at all keyboard buttons.
I can see this words at log file:
Downloading LSW from file: C:/Arirang/target/bin/rfitr.out
error ; ScAcquisition(0xA4); *** RfiComm::Start failed (2)
error ; ScAcquisition(0xA4); RfiComm::Start F A I L E D
debug ; ScAcquisition(0xA4); loadprogram(C:/Arirang/target/bin/rfitr.out) failed!
I have changed the hard drive and completely reloaded the software. At this day Logiq worked perfect: no loading fails and no errors.
But at the next day it could not load again, and I see again at log-file: RfiComm::Start failed.
What can you advice?
How to check RFI-board?
to rate and post a comment
Petco Techov
re: Logiq P6 loading problem
March 18, 2022 11:09
Sometimes strange things happen
to rate and post a comment