I have a trouble with a Lorad Elite manufactured on 1999. First, the equipment showed an error in NVRAM. I have replaced a component (Snaphat M4T28-BR12SH1) and this error no longer happened. After that, the machine starts up normally, showing every test (ROM, RAM, NVRAM, CAL data, compforce, tubehead) as passed, but when I attempt to make an exposure, the display shows "STORED CAL PARAMETER ERROR Code 61". The numerical displays for compression and thickness always show zeros, no matter if pressure is applied or not.
Any body have an idea about this problem? Any suggestion will be greatly appreciated.
Thank you so much,
hello, i have same problem, have atempted the procedures in section 4. will not allow exposure and code 61 comes on imediately upon pressing exposure button. any suggestions. can you send me what parameters to start with. in calibration screen 1 and 2?
hello, i have same problem, have atempted the procedures in section 4. will not allow exposure and code 61 comes on imediately upon pressing exposure button. any suggestions. can you send me what parameters to start with. in calibration screen 1 and 2?
hello manuel, i have same problem, have atempted the procedures in section 4. will not allow exposure and code 61 comes on imediately upon pressing exposure button. any suggestions.
BMI-PMI services nearly every make, model, and modality through our nationwide team of nearly 200 local service engineers. Flexible contracts, 24/7 remote monitoring, and ISO 13485 certification. www.brownsmedicalimaging.com / 800-701-9729
Manuel Casanova
LORAD ELITE ERROR 61
September 25, 2013 02:47
hellow:
I have a trouble with a Lorad Elite manufactured on 1999. First, the equipment showed an error in NVRAM. I have replaced a component (Snaphat M4T28-BR12SH1) and this error no longer happened. After that, the machine starts up normally, showing every test (ROM, RAM, NVRAM, CAL data, compforce, tubehead) as passed, but when I attempt to make an exposure, the display shows "STORED CAL PARAMETER ERROR Code 61". The numerical displays for compression and thickness always show zeros, no matter if pressure is applied or not.
Any body have an idea about this problem? Any suggestion will be greatly appreciated.
Thank you so much,
to rate and post a comment
ROBERTO DIAZ BEDOLLA
re: LORAD ELITE ERROR 61
September 26, 2013 04:30
you lost all configutaion when you changed battery. just re-calibrate all parameters in order to have exposure, compression al correct displays
to rate and post a comment
Omar AlAmir
re: re: LORAD ELITE ERROR 61
October 13, 2013 10:01
please send me service manual for Lorad elite
to rate and post a comment
Ed Ramirez
re: re: LORAD ELITE ERROR 61
March 18, 2015 04:06
hello, i have same problem, have atempted the procedures in section 4. will not allow exposure and code 61 comes on imediately upon pressing exposure button. any suggestions. can you send me what parameters to start with. in calibration screen 1 and 2?
to rate and post a comment
HUKAM CHAND
re: LORAD ELITE ERROR 61
September 27, 2013 08:44
Dear Manuel
After replacing did you give any command to initialize the RAM?
to rate and post a comment
Manuel Casanova
re: re: LORAD ELITE ERROR 61
September 27, 2013 10:38
The equip is working now, thanks to all
to rate and post a comment
Omar AlAmir
re: re: re: LORAD ELITE ERROR 61
October 13, 2013 10:01
I have same problem please advice
to rate and post a comment
Alfredo Enriquez
re: re: re: LORAD ELITE ERROR 61
May 01, 2014 08:47
What did you do to that the machine start to work? could you tell me please?
to rate and post a comment
Victor Martin
re: re: re: LORAD ELITE ERROR 61
April 01, 2016 03:06
What did you do? i have the same problem. Your response will be very much appreciated
to rate and post a comment
Ed Ramirez
re: re: LORAD ELITE ERROR 61
March 18, 2015 04:06
hello, i have same problem, have atempted the procedures in section 4. will not allow exposure and code 61 comes on imediately upon pressing exposure button. any suggestions. can you send me what parameters to start with. in calibration screen 1 and 2?
to rate and post a comment
Omar AlAmir
re: LORAD ELITE ERROR 61
October 13, 2013 10:01
I have same problem
please advice
to rate and post a comment
Ed Ramirez
re: LORAD ELITE ERROR 61
March 18, 2015 04:06
hello manuel, i have same problem, have atempted the procedures in section 4. will not allow exposure and code 61 comes on imediately upon pressing exposure button. any suggestions.
to rate and post a comment