We have a Lorad Elite Mammography which is been installed in India. The Mammography when switched on, does not boot. The screes starts with a black line and after some time it turns totally black.
We tried changing the Mirco-precessor PCB as well but when we put the new PCB the machine did not boot in the first go. in the second try it did boot but after 2 hours it does not boot at all now.
Comprehensive medical imaging support. We supply essential parts & maintenance for most OEMs, buy/sell quality used equipment, and offer mobile rentals globally. Contact us: info@lasoimaging.com
Rajeev Verma
Lorad elite Mammography boot problem
February 22, 2010 08:26
Hello partners,
We have a Lorad Elite Mammography which is been installed in India. The Mammography when switched on, does not boot. The screes starts with a black line and after some time it turns totally black.
We tried changing the Mirco-precessor PCB as well but when we put the new PCB the machine did not boot in the first go. in the second try it did boot but after 2 hours it does not boot at all now.
Please help me on the same.
Any help at the earliest will be appreciated.
Best Regards
Rajeev Verma
to rate and post a comment