I HAVE A LORAD HOLOGIC STEREOTABLE, INTHE WORSTATION I GET THE FOLLOWING MESSAGE
"DR WATSON FOR WINDOWS NT" an application error has occurred and an application log is being generated WIN32DSM.EXE EXCEPTION access violation (0xc0000005) address: 0x5f4040e and also "windows nt has found new hardware" I DID NOT CHANGE ANYTHING AS FOR HARDWARE.
HOW CAN I FIX THIS?
the DSM MODEL I HAVE IS 3-000A-2400 DSM1177 JULY 1994...
Please I will appreciate if I can get help with this.
you can attempt during boot up when the Windows NT first appears depress depress the F8 key when the Advanced Options screen appears select "Last Known Good Configuration" to see if it will repair the boot error.
if not there are other methods try to find a download of the resource kit.
if all this fails then you will have to reload software
We are the best choice for all your Endoscopy needs. We have Certified Pre-Owned refurbished and used Endoscopes, and all other related components and
accessories. We are committed to your absolute satisfaction. (513) 469-7267
JOSE32
LORAD HOLOGIC TABLE ( DR WATSON FOR WINDOWS)
October 20, 2015 08:46
PLEASE I NEED HELP WITH THE FOLLOWING:
I HAVE A LORAD HOLOGIC STEREOTABLE, INTHE WORSTATION I GET THE FOLLOWING MESSAGE
"DR WATSON FOR WINDOWS NT" an application error has occurred and an application log is being generated WIN32DSM.EXE EXCEPTION access violation (0xc0000005) address: 0x5f4040e and also "windows nt has found new hardware" I DID NOT CHANGE ANYTHING AS FOR HARDWARE.
HOW CAN I FIX THIS?
the DSM MODEL I HAVE IS 3-000A-2400 DSM1177 JULY 1994...
Please I will appreciate if I can get help with this.
thank you
to rate and post a comment
Lenny Place
re: LORAD HOLOGIC TABLE ( DR WATSON FOR WINDOWS)
October 20, 2015 06:37
you can attempt during boot up when the Windows NT first appears depress depress the F8 key when the Advanced Options screen appears select "Last Known Good Configuration" to see if it will repair the boot error.
if not there are other methods try to find a download of the resource kit.
if all this fails then you will have to reload software
to rate and post a comment
JOSE32
re: re: LORAD HOLOGIC TABLE ( DR WATSON FOR WINDOWS)
October 22, 2015 05:52
Thanks for your time and kindness!
to rate and post a comment