Hi everybody, I've got an issue with the diagfragm auto aperture of the system. It doesn't go back and stays almost closed all the time limiting the FOV. Is there any thoughts on how to fix this? I cheked the sensor opto that tells you if you have the apperture cassette in place, but is good conditions. I'm not sure if is the auto aperture board that needs to be replaced or I need to check something else.
Any help would be appreciated.
BMI-PMI services nearly every make, model, and modality through our nationwide team of nearly 200 local service engineers. Flexible contracts, 24/7 remote monitoring, and ISO 13485 certification. www.brownsmedicalimaging.com / 800-701-9729
FranciscoG
Lorad MIII Auto aperture issue
November 07, 2013 12:26
Hi everybody, I've got an issue with the diagfragm auto aperture of the system. It doesn't go back and stays almost closed all the time limiting the FOV. Is there any thoughts on how to fix this? I cheked the sensor opto that tells you if you have the apperture cassette in place, but is good conditions. I'm not sure if is the auto aperture board that needs to be replaced or I need to check something else.
Any help would be appreciated.
to rate and post a comment