Lorad selenia err initializing the DRAPI config files detector missing
July 15, 2019 10:31
Hi
ALL MEMEBRS
I have completed the software installation
And now when I log in.
Application started up and shows
THE DIGITAL DETECTOR IS WARMING UP
on the other window it shows
THERE WAS A PROBLEM INITIALIZING THE DRAPI.
CHECK FOR
1)MISSING CONFIGURATION FILES FOR DETECTOR
2) A CORRUPT GAIN CALIBRATION OR MAP FILE
THE APPLICATION WILL NOW BE RESTARTED!
NOTE : ONE THING MORE I HAVEN'T COPIED ARRAY FILES FROM FTP SERVICE LAPTOP BECAUSE I HAVEN'T any files copied I installed new hard drives due to lost the last system drives
AND IN THIS STATE I JUST INSTALLED SOFTWARE ITS NOT CONNECTED WITH GANTRY.
BMI-PMI services nearly every make, model, and modality through our nationwide team of nearly 200 local service engineers. Flexible contracts, 24/7 remote monitoring, and ISO 13485 certification. www.brownsmedicalimaging.com / 800-701-9729
soloana Kautar
Lorad selenia err initializing the DRAPI config files detector missing
July 15, 2019 10:31
Hi
ALL MEMEBRS
I have completed the software installation
And now when I log in.
Application started up and shows
THE DIGITAL DETECTOR IS WARMING UP
on the other window it shows
THERE WAS A PROBLEM INITIALIZING THE DRAPI.
CHECK FOR
1)MISSING CONFIGURATION FILES FOR DETECTOR
2) A CORRUPT GAIN CALIBRATION OR MAP FILE
THE APPLICATION WILL NOW BE RESTARTED!
NOTE : ONE THING MORE I HAVEN'T COPIED ARRAY FILES FROM FTP SERVICE LAPTOP BECAUSE I HAVEN'T any files copied I installed new hard drives due to lost the last system drives
AND IN THIS STATE I JUST INSTALLED SOFTWARE ITS NOT CONNECTED WITH GANTRY.
Waiting for your good reply
Thanks
to rate and post a comment
mike shouppe
re: Lorad selenia err initializing the DRAPI config files detector missing
July 21, 2019 12:59
You will need to install the detector files. Hopefully you have the disk that came with the detector or a backup.
to rate and post a comment