Hello:
Does anybody have a schematics diagram of an OC2 board with an orange dot? We have a problem with a bone densitometer, a Lunar DPL. Both motors, trans. & long, do not work. The motors are not receiving the supply voltage. The problem started after replacing a Bertan Negative High Voltage Power Supply with a Spellman Power Supply, so we have a BertanPositive and a Spellman Negative. We understand this shouldn't cause any problems, is this OK? I woill appreciatte any sugestions. Thank you.
Replacing HVPSs can not effect at any way OC2 board.
You must follow this steps:
1. Are the Power on led or light on?
2. If yes are the two leds of sbc board illuminated.
3. If yes are the funs of X RAY tube working.
4. If yes then you realy have a problem with oc2 board.
If not there are many-many other resons to have a problem. What is/are the message(s) that you get it will be very helpfull.
Brand new OEM Philips & Siemens Parts at unbeatable prices shipping domestically and Includes warranty!
Email P/N for pricing: sales@Relaxationinc.com
(P) 813-925-1314, www.relaxationinc.com
Elias Valdes
Lunar DPL
November 30, 2004 03:52
Hello:
Does anybody have a schematics diagram of an OC2 board with an orange dot? We have a problem with a bone densitometer, a Lunar DPL. Both motors, trans. & long, do not work. The motors are not receiving the supply voltage. The problem started after replacing a Bertan Negative High Voltage Power Supply with a Spellman Power Supply, so we have a BertanPositive and a Spellman Negative. We understand this shouldn't cause any problems, is this OK? I woill appreciatte any sugestions. Thank you.
to rate and post a comment
ALEXANDER PILAFTSIS
Re: Lunar DPL
December 01, 2004 04:22
Dear Mr Valdes,
Replacing HVPSs can not effect at any way OC2 board.
You must follow this steps:
1. Are the Power on led or light on?
2. If yes are the two leds of sbc board illuminated.
3. If yes are the funs of X RAY tube working.
4. If yes then you realy have a problem with oc2 board.
If not there are many-many other resons to have a problem. What is/are the message(s) that you get it will be very helpfull.
Regards
Alexander Pilaftsis
ALFATECH
Greece
to rate and post a comment