having errors when running qa; is failling:
Peak setting
percent spillover
air counts
air ration
Can anyone help determine the problem with this unit.
ernest 956-533-3863
Check if the x-ray tube and detector are centered over the brass spillover piece on the black calibration block first. Then check x-ray system second. Lastly, check detector.
BMI-PMI services nearly every make, model, and modality through our nationwide team of nearly 200 local service engineers. Flexible contracts, 24/7 remote monitoring, and ISO 13485 certification. www.brownsmedicalimaging.com / 800-701-9729
Ernesto Guerra
lunar dpx alpha
September 12, 2006 07:40
having errors when running qa; is failling: Peak setting percent spillover air counts air ration Can anyone help determine the problem with this unit. ernest 956-533-3863
to rate and post a comment
ALEXANDER PILAFTSIS
Re: lunar dpx alpha
September 13, 2006 02:40
Ernest just send me a copy of daily QA test and I will help you.
ALFATECH
Alexander Pilaftsis
TEL:+302310854834
FAX:+302310854434
THESSALONIKI, GREECE
info@alfatech.gr
to rate and post a comment
Abel Cardona
Re: lunar dpx alpha
September 20, 2006 10:54
check h.v. cables and tube centering.
to rate and post a comment
Juan Chow
Re: lunar dpx alpha
September 22, 2006 12:34
I have the same problems with my machine, I was wondering if you fix it? We are located in McAllen. Thank you
Juan Chow
to rate and post a comment
Don Settergren
Re: lunar dpx alpha
October 24, 2006 08:24
Check if the x-ray tube and detector are centered over the brass spillover piece on the black calibration block first. Then check x-ray system second. Lastly, check detector.
to rate and post a comment
Lucas Marcondes
Re: lunar dpx alpha errors
October 16, 2009 05:38
I have the same problem.
Error in:
Beam stop actv
Percent Spillover
Chi square
Air counts
Air ratio
Tissue Value
Please, if someone knows the problem, mail me.
lucas_fmc@hotmail.com
Thx!
to rate and post a comment
Elaine Medina
Re: lunar dpx alpha errors
November 09, 2011 08:53
HI LUCAS I HAVE THE SAME PROBLEM, PLEASE IF YOU KNOWS THE PROBLEM MAIL ME,I DONT HAVE SERVICE MANUAL
THANKS
to rate and post a comment