My customer just installed a DPX IQ and run his first QA tests. The unit did not pass the AIR COUNT LOW KeV and the AIR COUNT HIGH KeV tests.
He got a Photons count of 209.281 and 359.197 which he has been told is about half of what it should be. I would appreciate someone's help with calibration instructions to solve these probles. I can forward to you the DPXS.mbd QA history file from the unit showing these problems. Thanks for your help. arilaufer@att.net
I would venture to say that there was a problem in placement of the QC phantom. Make sure you are shooting through the nylon circle first and not through the brass. Also these systems seem to be really touchy about the exact location of the QC phantom in the rectangle. If you need the manual please let me know.
Dave Hopkins
Dhopkins@faulknerhospital.org
Dave, thank you for your advice. I would also like to thank Joe Milko and Alexander Pilaftsis
for their advice. After taking everyone's advice
and much tweaking, we were able to solve the problem.
Sell your scrap MRI magnets! Top prices, free shipping, and fast pickups. Don't let dust-collecting, idle assets go to waste. Contact: ryan.swiderski@cyclicmaterials.earth or call 437-826-1621
Ari Laufer
Lunar DPX IQ QA test problems
December 09, 2003 10:58
My customer just installed a DPX IQ and run his first QA tests. The unit did not pass the AIR COUNT LOW KeV and the AIR COUNT HIGH KeV tests.
He got a Photons count of 209.281 and 359.197 which he has been told is about half of what it should be. I would appreciate someone's help with calibration instructions to solve these probles. I can forward to you the DPXS.mbd QA history file from the unit showing these problems. Thanks for your help. arilaufer@att.net
to rate and post a comment
Dave Hopkins
Re: Lunar DPX IQ QA test problems
December 23, 2003 05:25
I would venture to say that there was a problem in placement of the QC phantom. Make sure you are shooting through the nylon circle first and not through the brass. Also these systems seem to be really touchy about the exact location of the QC phantom in the rectangle. If you need the manual please let me know.
Dave Hopkins
Dhopkins@faulknerhospital.org
to rate and post a comment
Ari Laufer
Re: Lunar DPX IQ QA test problems
December 30, 2003 04:53
Dave, thank you for your advice. I would also like to thank Joe Milko and Alexander Pilaftsis
for their advice. After taking everyone's advice
and much tweaking, we were able to solve the problem.
to rate and post a comment
Elaine Medina
Re: Lunar DPX IQ QA test problems
November 09, 2011 08:53
please i have de same problem,but i dont the service manual,could you sent it to me?
tkx
luculaki@gmail.com
to rate and post a comment
cesar lizarazo
re: Re: Lunar DPX IQ QA test problems
December 14, 2014 10:40
Hello I have the same problem can you send me the service manual please. Beatlecal@yahoo.com thanks
to rate and post a comment
cesar lizarazo
re: Lunar DPX IQ QA test problems
December 14, 2014 10:38
hi , i have the same problem, how you fix this.? thanks for you replay
to rate and post a comment