Over 300 Virginia Auctions End Today - Bid Now Over 300 Total Lots Up For Auction at Three Locations - Over 100 California Auctions End Tomorrow 07/22 - Bid Now, KS 07/24, CA 07/31
I have an Encore 2007 Version 12.5, the language was accidentally changed from English to German while trying to get in the correct Service password. Can anyone help me bring it back to English without reinstalling the program.
carefully edit a file called lunarstart.ini using a text editor in the encore folder which may be on the d drive inside another folder. Once you have the file in an editor, clear out past the = sign on the line that contains
Locale=
so the above is the only thing on the line. Save the file and restart. Hopefully I am remembering correctly. I had the same thing happen to me. Do a search for that file to find it if you need to.
Thank you for this info, the CPU is Pentium4 WinXP and sometimes has sudden display blackout possibly glitches.
Your correct it definitely changed the lunarstart.ini when we tried to get into service. Very fortunately we were able to do a system system restore yesterday and thank God it work.
We are the best choice for all your Endoscopy needs. We have Certified Pre-Owned refurbished and used Endoscopes, and all other related components and
accessories. We are committed to your absolute satisfaction. (513) 469-7267
gerardo millena
LUNAR
February 20, 2018 09:26
I have an Encore 2007 Version 12.5, the language was accidentally changed from English to German while trying to get in the correct Service password. Can anyone help me bring it back to English without reinstalling the program.
to rate and post a comment
xrayrepairdude
re: LUNAR
February 21, 2018 09:37
carefully edit a file called lunarstart.ini using a text editor in the encore folder which may be on the d drive inside another folder. Once you have the file in an editor, clear out past the = sign on the line that contains
Locale=
so the above is the only thing on the line. Save the file and restart. Hopefully I am remembering correctly. I had the same thing happen to me. Do a search for that file to find it if you need to.
to rate and post a comment
gerardo millena
re: re: LUNAR
February 22, 2018 08:39
Thank you for this info, the CPU is Pentium4 WinXP and sometimes has sudden display blackout possibly glitches.
Your correct it definitely changed the lunarstart.ini when we tried to get into service. Very fortunately we were able to do a system system restore yesterday and thank God it work.
to rate and post a comment
Joseph Asmaro
re: LUNAR
February 21, 2018 09:38
Gerardo,
If I understand your questions here, you would want to go to control panel and click on languages, you'll be able to change the language from there.
Good luck
to rate and post a comment
gerardo millena
re: re: LUNAR
February 22, 2018 08:38
Thanks Joseph we tried this but did not work.
to rate and post a comment