I want to thank all that replied! It is greatly appreciated and the problem has now been resolved although I am very suspicious about the relay on that board. Has anyone found the manufacturer or cross referenced the relay and ordered it? Any further information would be appreciated and thanks to all once more!
Thank you Wayne for the reply. Are you by chance related to Howard Horsman that I worked with at Abbott Northwestern Hospital in Minneapolis? If you get a chance to scan the schematic I would greatly appreciate it! Thanks again!!
I am not related (as far as I know), however the Horsmans (without an "e") are a rare spelling, from Welsh origins. They came down through Nova Scotia long ago, and Minnesota "almost Canada", so who knows?
email me at wayne@columbiaimaging.com so that I send send you the scan of the lamp timer PCB.
Online auction of modern high-end laboratory and biopharma research equipment from the recent bankruptcy of Spexis AG in Allschwil near Basel, Switzerland. Start bidding today! closes on June 4. info@dome-auctions.com..+31(0)20 808 2880
Chris Salberg
Machellette Collimaster C
March 15, 2012 03:26
I need a schematic showing me the resistance value of R1 on collimator lamp timer board. The resistor is toated! Anyone have this? hanks in Advance!
to rate and post a comment
Lenny Place
Re: Machellette Collimaster C
March 16, 2012 09:11
270 Ohms 1/2 watt
to rate and post a comment
Wayne Horsman
Re: Machellette Collimaster C
March 16, 2012 09:11
My C-FSR schematic indicates a 270 ohm 1/2 watt resistor.
email me if you want me to send you a scan of the lamp timer pcb schematic.
to rate and post a comment
Chris Salberg
Re: Machellette Collimaster C
March 17, 2012 09:51
I want to thank all that replied! It is greatly appreciated and the problem has now been resolved although I am very suspicious about the relay on that board. Has anyone found the manufacturer or cross referenced the relay and ordered it? Any further information would be appreciated and thanks to all once more!
Thank you Wayne for the reply. Are you by chance related to Howard Horsman that I worked with at Abbott Northwestern Hospital in Minneapolis? If you get a chance to scan the schematic I would greatly appreciate it! Thanks again!!
to rate and post a comment
Wayne Horsman
Re: Machellette Collimaster C
March 18, 2012 10:49
I am not related (as far as I know), however the Horsmans (without an "e") are a rare spelling, from Welsh origins. They came down through Nova Scotia long ago, and Minnesota "almost Canada", so who knows?
email me at wayne@columbiaimaging.com so that I send send you the scan of the lamp timer PCB.
to rate and post a comment
antolin cansigno
Re: Machellette Collimaster C
March 16, 2012 09:13
Hi guy, what is the make of the collimator for helping you.
to rate and post a comment
Ronald Lorg
Re: Machellette Collimaster C
March 15, 2012 05:58
R1 is a 270 ohm 1/2 watt resistor. Send me your email for diagrams. r.lorg@verizon.net
to rate and post a comment