Who knows?
We have a problem with GE Profile2. Blocks (IPG, TPS, CERD...) can't communicate each other.
LOGS-IPG\TPS cant communicate Scan. Scan is locked.
Temerature controller cant communicate with Scan.
When the system starts, one block start, another not. Next time - second starts, first not.
People says that it could the problems with main computer - SparcStation 20, with plates Aurora or Bit3.
Who knows something, please help. We cant find a problem for a long time....
Thank you.
Thank you for your answer.
TPS cant run the diagnostics...
We've checked bit3, didn't find anithing wrong.
What do you mean by CPU bds-? We'll check it.
DirectMed Imaging specializes in Equipment Sales, Parts, and Support. Parts are in stock and available for immediate delivery. In-room MRI Upgrades are available now. (855) 463-3727 or sales@directmedimaging.com
Svetlana Lepeshkina
Need a help!!! GE Profile2
November 23, 2015 08:23
Who knows?
We have a problem with GE Profile2. Blocks (IPG, TPS, CERD...) can't communicate each other.
LOGS-IPG\TPS cant communicate Scan. Scan is locked.
Temerature controller cant communicate with Scan.
When the system starts, one block start, another not. Next time - second starts, first not.
People says that it could the problems with main computer - SparcStation 20, with plates Aurora or Bit3.
Who knows something, please help. We cant find a problem for a long time....
Thank you.
to rate and post a comment
Dejun Li
re: Need a help!!! GE Profile2
November 24, 2015 10:06
Have you ran the diagnostics for the TPS?
What's the wrong number?
Maybe you should check the CPU bds and the bit3 in the TPS chassis.
to rate and post a comment
Svetlana Lepeshkina
re: re: Need a help!!! GE Profile2
November 25, 2015 08:57
Thank you for your answer.
TPS cant run the diagnostics...
We've checked bit3, didn't find anithing wrong.
What do you mean by CPU bds-? We'll check it.
to rate and post a comment
ELIAS
re: Need a help!!! GE Profile2
November 24, 2015 10:08
SEND AN EMAIL TO HELEP YOU eliaskaraka@gmail.com
to rate and post a comment