re: re: Need BIOS setting for GE CT/e host computer
June 08, 2012 02:08
Thanks for offering your help, Gustavo. Please mail BIOS settings for recon host computer as well. Thanks. Please mail to
akmisra03@yahoo.com.
Thanks again.
re: re: re: Need BIOS setting for GE CT/e host computer
June 08, 2012 03:29
I have sent to your email address BIOS Config for Softwares:
Application V/R3.1x or V/R2.00 * (OS4.5.1)_Be1
Application V/R4.0x (OS1.8.12)_Twin Linux
It is on page 43.
Don't forget to use the same settings of the manual. If the OS takes more than 10 minutes to load (on the bar graph they show you the total time), check the bios again, because it might work with low performance and you will have problems in a near future.
If you got problems loading the software, just ask for help
re: re: Need BIOS setting for GE CT/e host computer
January 14, 2016 04:08
GOOD AFTERNOON , STAND WITH PROBLEMS DURING THE BOOT THE SYSTEM CT MODEL CTE LINUX , HOST RECON NO COMPUTER IS RESPONDING , THE COMMAND , AND THE PERFORMING SYSTEM SHUTDOWN , JA WAS REPLACED BIOS OF RECON BATTERY , BUT STILL DEFAULT PERSISTS .
Need BIOS setting for GE CT/e host computer
June 07, 2012 03:15
Dear friends,
I need BIOS settings for GE CT/e host computer. It is a P4 system. I need to replace 3V batteries on mother board.
Please adv.
to rate and post a comment
Gustavo Gnecco
re: Need BIOS setting for GE CT/e host computer
June 08, 2012 12:17
I have it. Leave your email address
to rate and post a comment
A Mishra
re: re: Need BIOS setting for GE CT/e host computer
June 08, 2012 02:08
Thanks for offering your help, Gustavo. Please mail BIOS settings for recon host computer as well. Thanks. Please mail to
akmisra03@yahoo.com.
Thanks again.
to rate and post a comment
Gustavo Gnecco
re: re: re: Need BIOS setting for GE CT/e host computer
June 08, 2012 03:29
I have sent to your email address BIOS Config for Softwares:
Application V/R3.1x or V/R2.00 * (OS4.5.1)_Be1
Application V/R4.0x (OS1.8.12)_Twin Linux
It is on page 43.
Don't forget to use the same settings of the manual. If the OS takes more than 10 minutes to load (on the bar graph they show you the total time), check the bios again, because it might work with low performance and you will have problems in a near future.
If you got problems loading the software, just ask for help
Gustavo.
www.emsts.com.br
to rate and post a comment
ROBERTO FURTADO
re: re: Need BIOS setting for GE CT/e host computer
January 14, 2016 04:08
GOOD AFTERNOON , STAND WITH PROBLEMS DURING THE BOOT THE SYSTEM CT MODEL CTE LINUX , HOST RECON NO COMPUTER IS RESPONDING , THE COMMAND , AND THE PERFORMING SYSTEM SHUTDOWN , JA WAS REPLACED BIOS OF RECON BATTERY , BUT STILL DEFAULT PERSISTS .
THANK YOU
to rate and post a comment