Communication error between DFI and MVS console (TRUIF). Restart the MVS. If this
problem remains, check the cabling between the DFI and the MVS console.
4001 SCSI_E_READ
DFI disk failure.
CAUTION: After the following actions the PATIENT DATA,
DFI CONFIGURATION DATA and DFI IP SETS are LOST. Start the DFI power-up
service menu and low-level format the DFI disk. Re-install the DFI.
See service for more solutions
We are the best choice for all your Endoscopy needs. We have Certified Pre-Owned refurbished and used Endoscopes, and all other related components and
accessories. We are committed to your absolute satisfaction. (513) 469-7267
empeeno1 etlar
need help with philips bv libra
August 04, 2013 07:12
This bv libra c-arm cannot bootup. It displays 'Error in startup procedure 4001' Any help is appreciated with service manual also.
to rate and post a comment
Yuriy Kuznetsov
re: need help with philips bv libra
August 05, 2013 06:19
Communication error between DFI and MVS console (TRUIF). Restart the MVS. If this
problem remains, check the cabling between the DFI and the MVS console.
to rate and post a comment
P402
re: need help with philips bv libra
August 06, 2013 09:51
4001 SCSI_E_READ
DFI disk failure.
CAUTION: After the following actions the PATIENT DATA,
DFI CONFIGURATION DATA and DFI IP SETS are LOST. Start the DFI power-up
service menu and low-level format the DFI disk. Re-install the DFI.
See service for more solutions
to rate and post a comment
KONSTANTINOS PATTICHIS
re: re: need help with philips bv libra
December 09, 2015 12:59
Dear sir
I cannot load the software in the bv libra. I do not have the hw key. If you have a solution please tell me.
Thanks in advance
Pattichis Kostas
to rate and post a comment
Saqib Mirza
re: need help with philips bv libra
September 10, 2013 08:52
Dear
if you still have the problem I can help you out.
Saqib
Saqib.mirzapk@gmail.com
to rate and post a comment