We got SpellMAN 72 kW Generator on Toshiba Aquilion 64. There is no DC Voltage on AC Chassis (part no 406157001), but AC input is OK 200V 3phase. I tested AC Chassis separately, it's OK. Using oscilloscope I tasted a signal from AC/FIL/SDBK board, and so we got signal only to 1 of 3 SCR. All fuses inside AC, INV and HV are OK. Using XC test program (SPAG.EXE) we got AC FAULT and HFG error. I think, that there is a problem with AC/FIL/SDBK board, don't working controller XILINX.
Therapeutic Technologies closeout auctions take place on DOTmed.com. Bid today on 538 lots of medical equipment. Inspections may be done by appointment. Hours are Monday through Friday 9am-4pm Contact chrisnuytens1@gmail.com to schedule.
Andrey Khabylbkov
Need support SpellMan X3306 generator.
February 24, 2012 09:19
We got SpellMAN 72 kW Generator on Toshiba Aquilion 64. There is no DC Voltage on AC Chassis (part no 406157001), but AC input is OK 200V 3phase. I tested AC Chassis separately, it's OK. Using oscilloscope I tasted a signal from AC/FIL/SDBK board, and so we got signal only to 1 of 3 SCR. All fuses inside AC, INV and HV are OK. Using XC test program (SPAG.EXE) we got AC FAULT and HFG error. I think, that there is a problem with AC/FIL/SDBK board, don't working controller XILINX.
to rate and post a comment
Joseph Jenkins
Re: Need support SpellMan X3306 generator.
February 24, 2012 09:17
Contact me at iiltd@hotmail.com
to rate and post a comment
Joseph Jenkins
Re: Need support SpellMan X3306 generator.
February 24, 2012 09:18
AC unit
to rate and post a comment
Ha Hoang Thi
Re: Need support SpellMan X3306 generator.
February 27, 2012 08:55
Can you let me know how you resolve your problem. Thanks so much.
to rate and post a comment