Hi friends, this unit goes to stand alone after booting and when exposure switches are activated it displays error107.
I have checked interface cables between master board D702&D740panel board. What can I do?
I also need the software for this equipt for calibration.
Please help, my email; tubomie@gmail.com
Dear Tim
If No Data transmission takes place between the Deck & Master between the first 20 second after power on the power deck switches to the so called "Stand Alone" mode.
The Key Board Can be operated normally. If the exposure release button is operated in this mode the board maintained error message is displayed on the display.
The Cause of this error can be an interruption on the serial interface to the master. For this reason this connection must be checked exactly.
Thanks
Santosh K Tiwari
BMI-PMI services nearly every make, model, and modality through our nationwide team of nearly 200 local service engineers. Flexible contracts, 24/7 remote monitoring, and ISO 13485 certification. www.brownsmedicalimaging.com / 800-701-9729
Tim Tubomie
Nova 3000-Error 107
April 09, 2014 08:13
Hi friends, this unit goes to stand alone after booting and when exposure switches are activated it displays error107.
I have checked interface cables between master board D702&D740panel board. What can I do?
I also need the software for this equipt for calibration.
Please help, my email; tubomie@gmail.com
to rate and post a comment
Santosh Kumar Tiwari
re: Nova 3000-Error 107
April 10, 2014 08:57
Dear Tim
If No Data transmission takes place between the Deck & Master between the first 20 second after power on the power deck switches to the so called "Stand Alone" mode.
The Key Board Can be operated normally. If the exposure release button is operated in this mode the board maintained error message is displayed on the display.
The Cause of this error can be an interruption on the serial interface to the master. For this reason this connection must be checked exactly.
Thanks
Santosh K Tiwari
to rate and post a comment