Hello,
I have a OEC 6800 that had a Checksum error.
I replaced the CMOS Battery.
Set BIOS to the following:
Load Optimized Settings
Hard drive set to Manual
CPU set to 100/33/no
Now when the machine boots up, it gets stuck on "Waiting for generator Data" until it times out.
The result is no exposures.
Wondering if anyone has any suggestions?
Thank you
BMI-PMI services nearly every make, model, and modality through our nationwide team of nearly 200 local service engineers. Flexible contracts, 24/7 remote monitoring, and ISO 13485 certification. www.brownsmedicalimaging.com / 800-701-9729
Alan Jennings
OEC 6800 Mini C-Arm
August 02, 2019 09:29
Hello,
I have a OEC 6800 that had a Checksum error.
I replaced the CMOS Battery.
Set BIOS to the following:
Load Optimized Settings
Hard drive set to Manual
CPU set to 100/33/no
Now when the machine boots up, it gets stuck on "Waiting for generator Data" until it times out.
The result is no exposures.
Wondering if anyone has any suggestions?
Thank you
to rate and post a comment
Shawn Broussard
re: OEC 6800 Mini C-Arm
August 04, 2019 12:06
I had that happen once and just had to hook up with utility suites and reload the generator files, Regards
to rate and post a comment