I have a board from an OEC 7600. The sticker on the board has a P/N of B 54 0058. It is located in the tube head above the x-ray tube. Resistor R47 on my board is burned and I can't read the value. If you look at the edge of the board you will see the word "sensor". R47 is located in that column of components - the fifth component after the four diodes. Can anyone tell me the schematic of the board? Thank you
James,
That system is actually a Ziehm product with OECs name on it. They call the tube a monoblock. It is a self contained tube head. Tim at Stat Medical may be able to help you. My service manual does not show any specific info. on the tube or that board.
Deon
James Mathis
OEC 7600 board schematic
February 27, 2008 09:26
I have a board from an OEC 7600. The sticker on the board has a P/N of B 54 0058. It is located in the tube head above the x-ray tube. Resistor R47 on my board is burned and I can't read the value. If you look at the edge of the board you will see the word "sensor". R47 is located in that column of components - the fifth component after the four diodes. Can anyone tell me the schematic of the board? Thank you
to rate and post a comment
Deon Armes
Re: OEC 7600 board schematic
March 11, 2008 06:47
James,
That system is actually a Ziehm product with OECs name on it. They call the tube a monoblock. It is a self contained tube head. Tim at Stat Medical may be able to help you. My service manual does not show any specific info. on the tube or that board.
Deon
to rate and post a comment
James Mathis
Re: OEC 7600 board schematic
March 12, 2008 03:28
Thank you. I will give Tim a call.
to rate and post a comment