OEC-Diasonics 9000 X-ray Imaging System. What is the serial number that you have? The service manual which I have covers 96-000 thru 99-000. There is this AD/DA status menu to read the AD/DA channels. channel 1 is "Measured mA". For further technical advice, contact me at edwardhyan@yahoo.com.
Hi, I hope this is good. Mita I have a problem with a c-arm OEC 9000 the equipment starts without errors and generates x-rays and image in the monitor live but at the moment of releasing the switch or pedal of x ray or fluoro I generate the error E7 in the car of monitors , The communication is verified and is perfect, you can help me in indicating what the problem may be
Hi, I hope this is good. Mita I have a problem with a c-arm OEC 9000 the equipment starts without errors and generates x-rays and image in the monitor live but at the moment of releasing the switch or pedal of x ray or fluoro I generate the error E7 in the car of monitors , The communication is verified and is perfect, you can help me in indicating what the problem may be
We are the best choice for all your Endoscopy needs. We have Certified Pre-Owned refurbished and used Endoscopes, and all other related components and
accessories. We are committed to your absolute satisfaction. (513) 469-7267
Mick Thompson
OEC 9000
August 18, 2006 12:38
AD Channel-1 Failed ... does anyone know the meaning of this error message and how to fix? would greatly appreciate any help.
to rate and post a comment
Edward Yan
Re: OEC 9000
August 21, 2006 12:26
OEC-Diasonics 9000 X-ray Imaging System. What is the serial number that you have? The service manual which I have covers 96-000 thru 99-000. There is this AD/DA status menu to read the AD/DA channels. channel 1 is "Measured mA". For further technical advice, contact me at edwardhyan@yahoo.com.
to rate and post a comment
CARLOS PAEZ
re: Re: OEC 9000
February 13, 2017 10:20
Hi.
Hi, I hope this is good. Mita I have a problem with a c-arm OEC 9000 the equipment starts without errors and generates x-rays and image in the monitor live but at the moment of releasing the switch or pedal of x ray or fluoro I generate the error E7 in the car of monitors , The communication is verified and is perfect, you can help me in indicating what the problem may be
Best Regards
Carlos Páez
to rate and post a comment
Ricardo Rojas
Re: OEC 9000
September 08, 2006 10:16
I can help with the problem
my email
in@gme-co.com
jose reda
to rate and post a comment
CARLOS PAEZ
re: Re: OEC 9000
February 13, 2017 10:20
Hi.
Hi, I hope this is good. Mita I have a problem with a c-arm OEC 9000 the equipment starts without errors and generates x-rays and image in the monitor live but at the moment of releasing the switch or pedal of x ray or fluoro I generate the error E7 in the car of monitors , The communication is verified and is perfect, you can help me in indicating what the problem may be
Best Regards
Carlos Páez
to rate and post a comment