OEC 9400 Display code A7 Starting Interlocks and BPlus charge
April 27, 2016 06:47
Hello, this OEC 9400 got the batteries replaced and when I tried to turn it back on, the display on the C arm shows code A7: Starting Interlocks and BPlus charge (from manual). And it doesn't go further than A7.
Once the batteries were replaced the system was plugged into the wall to charge the batteries for more than 48hrs.
Has somebody faced this issue before? what did you do?
Just wondering. Did you do filament calibrations after battery change. May be unrelated. But having changed batteries may have disconnected something by accident in area of the cables pulling.
Hello Francisco, I have the same problems from the star before I change the batteries pack the system did not came up from a7 did you resolve your problems, because I still working on the problems, can u help me
If you send me an email address I can send you the a diagram to help troubleshoot. This can be a switch/wiring issue possibly a power supply, battery, fuse...
BMI-PMI services nearly every make, model, and modality through our nationwide team of nearly 200 local service engineers. Flexible contracts, 24/7 remote monitoring, and ISO 13485 certification. www.brownsmedicalimaging.com / 800-701-9729
FranciscoG
OEC 9400 Display code A7 Starting Interlocks and BPlus charge
April 27, 2016 06:47
Hello, this OEC 9400 got the batteries replaced and when I tried to turn it back on, the display on the C arm shows code A7: Starting Interlocks and BPlus charge (from manual). And it doesn't go further than A7.
Once the batteries were replaced the system was plugged into the wall to charge the batteries for more than 48hrs.
Has somebody faced this issue before? what did you do?
Thanks
to rate and post a comment
Lenny Place
re: OEC 9400 Display code A7 Starting Interlocks and BPlus charge
April 29, 2016 01:17
a cable is disconnected or loose check on the back of the card cage one of the cables there is probably the cause
to rate and post a comment
randy oswalt
re: OEC 9400 Display code A7 Starting Interlocks and BPlus charge
April 29, 2016 01:21
Just wondering. Did you do filament calibrations after battery change. May be unrelated. But having changed batteries may have disconnected something by accident in area of the cables pulling.
to rate and post a comment
FranciscoG
re: re: OEC 9400 Display code A7 Starting Interlocks and BPlus charge
May 02, 2016 12:54
Hi Randy, no I haven't done any calibration after changing the battery packs, because the system won't come up. I will check again all the cables.
to rate and post a comment
Chris Salberg
re: OEC 9400 Display code A7 Starting Interlocks and BPlus charge
April 29, 2016 01:21
Did you calibrate and test the battery charger?
to rate and post a comment
Javier De leon
re: OEC 9400 Display code A7 Starting Interlocks and BPlus charge
May 08, 2018 09:41
Hello Francisco, I have the same problems from the star before I change the batteries pack the system did not came up from a7 did you resolve your problems, because I still working on the problems, can u help me
to rate and post a comment
Lenny Place
re: re: OEC 9400 Display code A7 Starting Interlocks and BPlus charge
May 09, 2018 09:46
If you send me an email address I can send you the a diagram to help troubleshoot. This can be a switch/wiring issue possibly a power supply, battery, fuse...
to rate and post a comment
Javier De leon
re: re: re: OEC 9400 Display code A7 Starting Interlocks and BPlus charge
May 09, 2018 03:13
I all ready send u an email tanks for the help regards
to rate and post a comment
Javier De leon
re: re: re: OEC 9400 Display code A7 Starting Interlocks and BPlus charge
May 09, 2018 03:13
Javierfda30@gmail.com
to rate and post a comment
Thieken Luke
re: re: re: re: OEC 9400 Display code A7 Starting Interlocks and BPlus charge
March 06, 2019 10:32
I have the same issue a7 change technique processor and disk. Reseeded all connectors with no luck. Any help available?
to rate and post a comment