Can anybody help with a problem that I have with an OEC9600 C-Arm.
FAULT CONDITION: Boot up stops at 8 squares (it keeps trying to boot up by highlighting squares but always stops at only 8).
The Monitor Trolley seems to function OK in stand alone mode.
Kind regards
Rick Smith
BMI-PMI services nearly every make, model, and modality through our nationwide team of nearly 200 local service engineers. Flexible contracts, 24/7 remote monitoring, and ISO 13485 certification. www.brownsmedicalimaging.com / 800-701-9729
Rick Smith
OEC 9600 C-ARM boot up problem
June 19, 2008 07:07
Can anybody help with a problem that I have with an OEC9600 C-Arm.
FAULT CONDITION: Boot up stops at 8 squares (it keeps trying to boot up by highlighting squares but always stops at only 8).
The Monitor Trolley seems to function OK in stand alone mode.
Kind regards
Rick Smith
to rate and post a comment
Muneer Abott
Re: OEC 9600 C-ARM boot up problem
June 20, 2008 07:43
Hard drive problem
to rate and post a comment
Nestor Galindo
Re: OEC 9600 C-ARM boot up problem
June 20, 2008 04:18
Your problem is SRAM or HArd disk.
Contact me to ngalindo@smartvision.tie.cl
to rate and post a comment
Davide Scafa
re: Re: OEC 9600 C-ARM boot up problem
July 09, 2013 03:02
Hi Mohamed
I have a problem with the start of the program oec 9600 on the screen I get a strip of squares in the upper left corner and a slider.
can you help me?
Regards
Davide
to rate and post a comment
Charles Tittl
Re: OEC 9600 C-ARM boot up problem
July 03, 2008 03:44
Also could be possibly bad capacitors on the backplane...
to rate and post a comment