I have a problem with a philips generator optimus cp with Diagnost 5. I have problems with filament circuit or feedback in this signal. Do anyone can helpme to calibrate the generator??
The equipment doesnt do x - ray.
thank you
Leonardo
Dear leonardo:
I need know the error code of your optimus cp.
The best idea is : remove the negative HT cable from tube;disconnect the power from HT generator ,switch on the system and fill a lamp(used in the cars) and see what appen.
let me know
regards
umberto
Specializing in GE, we keep your ICU monitors calibrated and patient-ready—fast, reliable service from expert biomed techs. Southeastern Biomedical: 888-310-7322.
Abel Cardona
optimus cp
November 23, 2005 09:44
I have a problem with a philips generator optimus cp with Diagnost 5. I have problems with filament circuit or feedback in this signal. Do anyone can helpme to calibrate the generator??
The equipment doesnt do x - ray.
thank you
Leonardo
to rate and post a comment
Umberto Sciunnach
Re: optimus cp
November 24, 2005 01:26
Dear leonardo:
I need know the error code of your optimus cp.
The best idea is : remove the negative HT cable from tube;disconnect the power from HT generator ,switch on the system and fill a lamp(used in the cars) and see what appen.
let me know
regards
umberto
to rate and post a comment