Hello dear!
Do you have the service manual on Palomar StarLux 500 or interpretation of error codes?
On our machine at inclusion with a LUX 1540 HANDPIECE appears 022 and 038 error codes.
I will be grateful for any information.
Ophthalmic-focused expertise in YAG systems including repair, maintenance and calibration handled with precision by trained professionals. Request service • sales@laserlocators.com • 1-877-924-2020
Joseph Hughes
Palomar Starlix 500 error code 023
July 30, 2014 09:27
The title pretty much says it all! I am working on a Palomar Starlix 500 system and once it is all on it gives 023 error.
Does anyone have a manual for this that I could take a look at? Or any experience working on them?
Thanks!
to rate and post a comment
Lachman Aswani
re: Palomar Starlix 500 error code 023
July 31, 2014 08:49
The water level is low. Check/fill water reservoir. If reservoir is full then check the water level switch inside reservoir. Good luck.
to rate and post a comment
Joseph Hughes
re: re: Palomar Starlix 500 error code 023
July 31, 2014 04:06
Thank you! I will check that out today. Do you happen to have a list of error codes you could send me?
to rate and post a comment
Lachman Aswani
re: re: re: Palomar Starlix 500 error code 023
August 01, 2014 09:39
Please let me know your email address. Regards, Lachman.
to rate and post a comment
Joseph Hughes
re: re: re: re: Palomar Starlix 500 error code 023
August 01, 2014 01:59
My email is joesipaq -at- gmail -d.ot- com
to rate and post a comment
Lachman Aswani
re: re: re: re: re: Palomar Starlix 500 error code 023
August 04, 2014 08:51
Just emailed you the error code list. All the best.
to rate and post a comment
Syed Naqvi
re: re: re: re: re: re: Palomar Starlix 500 error code 023
August 14, 2014 04:31
Leachman, can you please email me the error list as well. Syed.w.naqvi@gmail.com, thanks
to rate and post a comment
Lachman Aswani
re: re: re: re: re: re: re: Palomar Starlix 500 error code 023
August 15, 2014 11:06
Just sent the error list as requested.Regards
to rate and post a comment
AK
re: re: re: re: re: re: re: re: Palomar Starlix 500 error code 023
July 24, 2015 07:46
Sir,
Can I request you to mail me the list of the Palomar error codes ?
Thanks a lot.
Please email to avk209@gmail.com
Regards
to rate and post a comment
Kevin Waller
re: re: re: re: re: re: re: re: Palomar Starlix 500 error code 023
September 29, 2015 04:07
Hello kind and knowledgeable friend. Would you be so kind as to forward that list of error codes to me as well?
kwaller@nationallaser.com
Best Regards
to rate and post a comment
Simer
re: re: Palomar Starlix 500 error code 023
November 05, 2017 04:16
Hello dear!
Do you have the service manual on Palomar StarLux 500 or interpretation of error codes?
On our machine at inclusion with a LUX 1540 HANDPIECE appears 022 and 038 error codes.
I will be grateful for any information.
to rate and post a comment
Bruno Oliveira
re: re: Palomar Starlix 500 error code 023
December 13, 2017 09:13
Hello,
Please, help me. I have an Starlux, which give 054 error. Can you send me the error manual?
e-mail: automacao.oliveirab@gmail.com
to rate and post a comment