Our furnace went down over the weekend and now we are getting a PC 10 error. The temp was 53 when we arrived in the morning. Could this be the cause of low frequency and if so how long does it take for the magnet to warm up to temp.
If 53F it is very dangerous low temp for a permanent magnet.
you must find/have a way to do a fast and rougly warm up procedure urgently.
could take 2-3 days to becomes warm.
The Recomneded Temp of Environment is 24 +/- 2 Celsius If temp rises from 40 Celsius the Magnet has been Damag
Temp the one celsius change of temp cause this PC10 Error.
If 53F, you need to Put Electric Heater blower to make it
Around 88 F(24 Celsius). Please Also Note Down the Temp of Heaters.
GCI offers complete MRI & CT sales & service with ROI analysis, in-house financing, contractor drawings, accreditation, training, marketing, and OEM-level support beyond the sale.
PC 10 Error -Airis1
January 27, 2014 06:19
Our furnace went down over the weekend and now we are getting a PC 10 error. The temp was 53 when we arrived in the morning. Could this be the cause of low frequency and if so how long does it take for the magnet to warm up to temp.
to rate and post a comment
Mr.CT.service
re: PC 10 Error -Airis1
January 29, 2014 08:19
If 53F it is very dangerous low temp for a permanent magnet.
you must find/have a way to do a fast and rougly warm up procedure urgently.
could take 2-3 days to becomes warm.
to rate and post a comment
Cheema
re: PC 10 Error -Airis1
February 01, 2014 08:31
The Recomneded Temp of Environment is 24 +/- 2 Celsius If temp rises from 40 Celsius the Magnet has been Damag
Temp the one celsius change of temp cause this PC10 Error.
If 53F, you need to Put Electric Heater blower to make it
Around 88 F(24 Celsius). Please Also Note Down the Temp of Heaters.
to rate and post a comment