My philips c arm is malfunctioning. when I push the on button the LED blinks only once then the whole system will automatically shutsdown. What seems to be the problem? I've check all the power source is good. what seems to be the problem?
There is a hidden button near on switch you can feel it by your finger and press it. And tell me the error number. If my memory is correct. Last 10 years not seen this machine. Earlier i was a expert in this series when i worked with philips.
Saju
richard tolentinp
Philips BV 25 malfunctioning
August 01, 2011 01:10
My philips c arm is malfunctioning. when I push the on button the LED blinks only once then the whole system will automatically shutsdown. What seems to be the problem? I've check all the power source is good. what seems to be the problem?
THANKS.
to rate and post a comment
alejandro mendoza
Re: Philips BV 25 malfunctioning
August 01, 2011 11:10
check h.v cascade unit
remove the voltage source of the hv unit and turn on
regards
to rate and post a comment
Abdullah Cengiz
Re: Philips BV 25 malfunctioning
August 09, 2011 02:49
Check thristors on WA mains control. Once I had the same problem with BV29. Replacing thyristors fixed.
to rate and post a comment
saju bhaskaran
Re: Philips BV 25 malfunctioning
August 12, 2011 08:55
There is a hidden button near on switch you can feel it by your finger and press it. And tell me the error number. If my memory is correct. Last 10 years not seen this machine. Earlier i was a expert in this series when i worked with philips.
Saju
to rate and post a comment