I' have a problem to power on the c arm.
It is manufactured 1989.
The power suplies are in the mobile stand.
In the mobile troley there is only the monitor and the scopofix.
Has anybody the drawings fot this model.
system BV 25 E
I told you ,on the trolley there is only the monitors and scopofix.
I suppose that you have a problem on the supply (inside the stand) or you have broken a big white cable that make connection betwin the stand and trolley.
Check only one monitor and connect it directly to 220v.
if the green lamp goes on ,your problem is or the power supply inside the trolley or the big cable.
you do not need of schematics for this simple fault.
regards
uto
from the mobile stand(C ARM)i have 2 cables!
one to conect to net 220v
and the second the big one to connect directly to the scopofix.
I repeat to you again that there is no power suply in the mobile troley, only the scopofix and one monitor NOTHING ELSE !!!!!!!.
this BV is not like others that i know
I do not know How explain.
Put a scpe to the exit at tv chain, Have the video ?????
COnnect the second monitor to the 220.
There is the circle ???????
Otherwise I must came in your country.
regards
uto
Connect the big connector from the trolley to connector which is there in the trolley instead of connecting to the C-arm and swith on the trolley stand and see wether monitor green lights on and reply to me.
I have the manuals.
with regards
saju
from the mobile stand(C ARM)i have 2 cables!
one to conect to net 220v
and the second the big one to connect directly to the scopofix.
I repeat to you again that there is no power suply in the mobile
troley, only the scopofix and one monitor NOTHING ELSE !!!!!!!.
this BV is not like others that i know
Comprehensive medical imaging support. We supply essential parts & maintenance for most OEMs, buy/sell quality used equipment, and offer mobile rentals globally. Contact us: info@lasoimaging.com
Stavros Stavropoulos
Philips BV 25 (system E)
January 21, 2008 05:47
I' have a problem to power on the c arm.
It is manufactured 1989.
The power suplies are in the mobile stand.
In the mobile troley there is only the monitor and the scopofix.
Has anybody the drawings fot this model.
system BV 25 E
to rate and post a comment
Umberto Sciunnach
Re: Philips BV 25 (system E)
January 22, 2008 04:26
You cannot found nothing under the monitors.
I am A philips service man , but let me know something more about the fault.
regards
uto
to rate and post a comment
Stavros Stavropoulos
Re: Philips BV 25 (system E)
January 22, 2008 05:12
on the mobile troley there is only one monitor and the scopofix nothing else.
when i press the power on buton nothing hapens only the led blip.
to rate and post a comment
Umberto Sciunnach
Re: Philips BV 25 (system E)
January 23, 2008 06:15
I told you ,on the trolley there is only the monitors and scopofix.
I suppose that you have a problem on the supply (inside the stand) or you have broken a big white cable that make connection betwin the stand and trolley.
Check only one monitor and connect it directly to 220v.
if the green lamp goes on ,your problem is or the power supply inside the trolley or the big cable.
you do not need of schematics for this simple fault.
regards
uto
to rate and post a comment
Stavros Stavropoulos
Re: Philips BV 25 (system E)
January 24, 2008 07:20
from the mobile stand(C ARM)i have 2 cables!
one to conect to net 220v
and the second the big one to connect directly to the scopofix.
I repeat to you again that there is no power suply in the mobile troley, only the scopofix and one monitor NOTHING ELSE !!!!!!!.
this BV is not like others that i know
to rate and post a comment
Umberto Sciunnach
Re: Philips BV 25 (system E)
January 25, 2008 12:20
I do not know How explain.
Put a scpe to the exit at tv chain, Have the video ?????
COnnect the second monitor to the 220.
There is the circle ???????
Otherwise I must came in your country.
regards
uto
to rate and post a comment
saju bhaskaran
Re: Philips BV 25 (system E)
January 22, 2008 04:33
Dear Stavros
Connect the big connector from the trolley to connector which is there in the trolley instead of connecting to the C-arm and swith on the trolley stand and see wether monitor green lights on and reply to me.
I have the manuals.
with regards
saju
to rate and post a comment
Stavros Stavropoulos
Re: Philips BV 25 (system E)
January 25, 2008 12:46
from the mobile stand(C ARM)i have 2 cables!
one to conect to net 220v
and the second the big one to connect directly to the scopofix.
I repeat to you again that there is no power suply in the mobile
troley, only the scopofix and one monitor NOTHING ELSE !!!!!!!.
this BV is not like others that i know
to rate and post a comment