Have an intermittent problem with a Philips BV Pulsera that it wont fluro from the handswitch but will from the pedal. When they click the handswitch they can hear realys click. The handswitch has already been replaced and still the same. I dont have any schematics either
Lightly used system available direct from the end user customer. MONARCH QUEST
Featuring our most advanced, data-driven navigation software with AI-Powered algorithms & advanced imaging integration with the GE HealthCare OEC 3D C-arm.
Bill Manson
Philips BV Pulsera
March 12, 2014 08:46
Have an intermittent problem with a Philips BV Pulsera that it wont fluro from the handswitch but will from the pedal. When they click the handswitch they can hear realys click. The handswitch has already been replaced and still the same. I dont have any schematics either
to rate and post a comment
Lenny Place
re: Philips BV Pulsera
March 12, 2014 07:09
see if the the H5 A LED on the XGC board comes on when the handswitch is depressed if not check the SHA3 board and reseat it and the connectors
to rate and post a comment