Hi all ,
I want the ckt dig(at least block dig) of Philips BV25 machine . It is not switching on, there are 2 PCBs in power supply box & on 1 pcb 2 mini relays soldered what are the functions of those ....Please Help,,,,
What is your incoming line voltage? Check your line voltage and confirm transformer is tapped to match your line voltage/phase and either 50/60 hz.The BV25 functions on multiple voltages but must be configured for each.
actually mains voltage are ok (240 V.) even LEDs on supply PCBs (green & red both ) are litted. when I push the power button on Carm unit LED above the button blink once only .It seems any relay is malfunctioning.
Lightly used system available direct from the end user customer. MONARCH QUEST
Featuring our most advanced, data-driven navigation software with AI-Powered algorithms & advanced imaging integration with the GE HealthCare OEC 3D C-arm.
Anwar Ahmed
philips bv25 power supply problem
July 24, 2009 12:59
Hi all ,
I want the ckt dig(at least block dig) of Philips BV25 machine . It is not switching on, there are 2 PCBs in power supply box & on 1 pcb 2 mini relays soldered what are the functions of those ....Please Help,,,,
to rate and post a comment
Joe Zaremba
Re: philips bv25 power supply problem
July 24, 2009 04:13
What is your incoming line voltage? Check your line voltage and confirm transformer is tapped to match your line voltage/phase and either 50/60 hz.The BV25 functions on multiple voltages but must be configured for each.
to rate and post a comment
Anwar Ahmed
Re: philips bv25 power supply problem
July 25, 2009 09:54
Thanks Mr. Joe for reply,
actually mains voltage are ok (240 V.) even LEDs on supply PCBs (green & red both ) are litted. when I push the power button on Carm unit LED above the button blink once only .It seems any relay is malfunctioning.
Please guide...
to rate and post a comment