I have a table problem with a Philips Diagnost system. The table functions are locked out, but will work from the scopo. Also, the scopo is very jerky when traveling longitudinal. Any advice would be appreciated!
Phil
I know most of these tables, named cough in manuals, are similar to Pickers one. If this is the case, you will need to perform a longitudinal cough movement calibration. it is laborius and has a middle difficulty. You will need a DSO, a Digital Voltimeter and the exact calibration manual for o it.
Let me know if i can help in another way
jose
Philip Johnson
Philips Diagnost, Table problem..
February 18, 2009 09:54
I have a table problem with a Philips Diagnost system. The table functions are locked out, but will work from the scopo. Also, the scopo is very jerky when traveling longitudinal. Any advice would be appreciated!
Phil
to rate and post a comment
Jose Morillo
Re: Philips Diagnost, Table problem..
March 08, 2009 12:54
I know most of these tables, named cough in manuals, are similar to Pickers one. If this is the case, you will need to perform a longitudinal cough movement calibration. it is laborius and has a middle difficulty. You will need a DSO, a Digital Voltimeter and the exact calibration manual for o it.
Let me know if i can help in another way
jose
to rate and post a comment