Measurements unavailable. The report package is initializing. Initialization completes approximately 30 seconds after imaging starts..... Please try your measurements again.
Coul anybody help ?
You must reload all software again, but if not first trouble with soft, you must to change hard disk and reload all software, is import to know software version, that trouble is a trouble with file gui on windows
Best regards
From preventive maintenance through comprehensive cryogen services, BMI-PMI is your trusted partner for new/reconditioned sales, installation, and service of both facility-based and mobile MRI solutions. www.brownsmedicalimaging.com / 800-701-9729
Sergey Begej
Philips Envisor problem
July 20, 2009 09:00
Measurements unavailable. The report package is initializing. Initialization completes approximately 30 seconds after imaging starts..... Please try your measurements again.
Coul anybody help ?
to rate and post a comment
BINH PHAN
Re: Philips Envisor problem
July 21, 2009 12:27
repair software!
to rate and post a comment
Miguel de los Santos
Re: Philips Envisor problem
July 21, 2009 10:33
You must reload all software again, but if not first trouble with soft, you must to change hard disk and reload all software, is import to know software version, that trouble is a trouble with file gui on windows
Best regards
to rate and post a comment
Arif Son
Re: Philips Envisor problem
August 02, 2009 11:30
you should reinstall the SW with correct Revision
to rate and post a comment