If you have a broken Sonosite, Mindray, GE, Philips, Hitachi, or Aloka system or probe contact us today. Free ultrasound & probe EVALS with 1 Year Warranty on all repairs. We repair all orders in 1-5 days. Call 844-644-5440 Email: Sales@Lenard.Healthcare
joe ssali
Philips HD 11
December 15, 2016 10:20
PHILIPS HD 11 ULTRASOUND MACHINE HANGS AND RESTARTS IN MIDDLE OF THE EXAMINATION. ANY SOLUTIONS?
to rate and post a comment
Zach Ruder
re: Philips HD 11
December 16, 2016 05:02
Watch the LED's on the power supply to see if any of them go out when the problem occurs. That may indicate a voltage problem in the power supply.
to rate and post a comment
joe ssali
re: re: Philips HD 11
December 19, 2016 10:09
Dear Zach, all the lEDS are running well. The machine displays:
"An internal error has been detected and the system needs to restart. Please restart the system." I have checked all the console boards. They are all running well, except for the signal processing board that has red LEDs.
to rate and post a comment
Zach Ruder
re: re: re: Philips HD 11
December 19, 2016 05:05
I have seen that board cause the same problem as well. I am not sure how to test it properly however.
to rate and post a comment
Zach Ruder
re: re: re: Philips HD 11
December 19, 2016 05:05
Also, Even though all the LED's are lit....make sure they all have the proper voltages.
to rate and post a comment
joe ssali
re: re: re: re: Philips HD 11
December 20, 2016 10:15
Thank you Zach. I will do more troubleshooting on the voltage levels.
Thank you
to rate and post a comment
DIVYANG TRIVEDI
re: re: re: re: Philips HD 11
May 02, 2018 09:54
Dear friend,
Can you send me the power supply voltage checking details as I don't know where to check all these voltages and the normal voltage values..
I will be thankful if you will guide me friend..
My mail id is
divyangtrivedi@hotmail.com
Regards
to rate and post a comment