Hi Evry one , i have a problem with my philips hd11 xe , i just installed a new graphic board nvidia 7300LE ,when i boot the machine a blue screen is appear and new hardware is detected,
IS it a problem of compatibility or it need driver??if the second one haw can i instal this driver??
I do not have a lot of experiense with Philips but i think that when you install a new graphics card you have to install one of the compatibility list of Philips otherwise it wont work.Also when you install a new graphics board it has to be exactly the same in order to work,i mean that if the Philips has the 7300LE you can not install the 7300MD,it has to be the 7300LE.
Hi!
Why did you decide that your problem is the graphics card? May be your problem in monitor?
You must find a video card of the same model that was you before.
Or you need to change the whole entire computer, and then reinstall software.
Make sure you replace the Graphic Card with a Philips compatible one; otherwise, it won't work. All the Graphic Cards that work on Philips machine are proprietary to Philips only (you cannot buy one from the market and install it.)
You need this part number: GeForce NX7300GS-TD2S6E
Email me at: jasmaro@toptiermedical.com, for further help or if you would like to purchase the part.
HIGH QUALITY fully tested & refurbished systems to manufacturer specifications like new. Installation & service support worldwide. Parts & tubes in stock with warranty. Sales@Elsmed.com
Biomedical-eng
Philips HD11 XE
April 03, 2016 01:08
Hi Evry one , i have a problem with my philips hd11 xe , i just installed a new graphic board nvidia 7300LE ,when i boot the machine a blue screen is appear and new hardware is detected,
IS it a problem of compatibility or it need driver??if the second one haw can i instal this driver??
to rate and post a comment
James Bong
re: Philips HD11 XE
April 04, 2016 09:37
You need to reload a software as well as your new graphic card is not compatible with your current HD11 xe software.
to rate and post a comment
Nagender Sharma
re:Philips HD11 XE
April 04, 2016 09:37
first go in service mode,then u will able to rectify this problem
to rate and post a comment
EROTOKRITOS SKENTOS
re: Philips HD11 XE
April 04, 2016 09:38
I do not have a lot of experiense with Philips but i think that when you install a new graphics card you have to install one of the compatibility list of Philips otherwise it wont work.Also when you install a new graphics board it has to be exactly the same in order to work,i mean that if the Philips has the 7300LE you can not install the 7300MD,it has to be the 7300LE.
to rate and post a comment
Aleksander Proof
re: Philips HD11 XE
April 04, 2016 09:38
Hi!
Why did you decide that your problem is the graphics card? May be your problem in monitor?
You must find a video card of the same model that was you before.
Or you need to change the whole entire computer, and then reinstall software.
to rate and post a comment
joe ssali
re: Philips HD11 XE
April 04, 2016 09:40
Drivers should not have been an issue, since the system disk was not changed or system software reinstalled. It could be an incompatibility problem.
to rate and post a comment
Biomedical-eng
re: re: Philips HD11 XE
April 05, 2016 08:54
I Think that any PSI graphic card is compatible or not ??
to rate and post a comment
Anton Zaharchenko
re: Philips HD11 XE
April 04, 2016 09:40
Hi,you must to see in your backup support this graphic board and you should reinstall sw
to rate and post a comment
Joseph Asmaro
re: Philips HD11 XE
April 04, 2016 09:41
Make sure you replace the Graphic Card with a Philips compatible one; otherwise, it won't work. All the Graphic Cards that work on Philips machine are proprietary to Philips only (you cannot buy one from the market and install it.)
You need this part number: GeForce NX7300GS-TD2S6E
Email me at: jasmaro@toptiermedical.com, for further help or if you would like to purchase the part.
to rate and post a comment
Biomedical-eng
re: Philips HD11 XE
April 04, 2016 04:55
Dose safe boot mode repair the problem ??
to rate and post a comment