Philips HDI-4000 - need authorization code to set up DICOM
December 11, 2008 02:56
Dear Sirs!
Please help me to get an authorization code (password) for my HDI-4000. I need to reconfigure IP address for DICOM - and it asks me for code. Can I reset the password to default if previous service engineer set custom one?Pleas help!:) Thanks!
Re: Philips HDI-4000 - need authorization code to set up DICOM
December 17, 2008 01:36
Let me answer myself :) I've found an authorization key via debugger - it is 'bothell'. So if you need to get a network settings on HDI 4000 - just go to SETUP (Press SETUP button) then DICOM, then Network Settings (or Configuration - I'm not sure) - then enter the 'bothell' - and the standard W2K Network Settings window appears. By the way, it's an ordinary Explorer, so you can put any location (e.g. C:\) in address bar and work with 4000 as on simple PC. Hope this info will become usefull for somebody :)
Re: Philips HDI-4000 - need authorization code to set up DICO
August 21, 2009 05:36
Hi.
And very much thanks for helping.
I did not recive it yet. Please send it to:
dr.edson.barrios@gmail.com and or:
dr_edson_barrios@hotmail.com
Again thanks a lot.
Sincerely: Dr Edson Barrios.
One call to 440-263-6575 and your move will be covered.
We repair & store trailers. We build to your custom needs.
JDI Mobile Medical Manufacturing. Inc. We have your back.
Ilia Davidov
Philips HDI-4000 - need authorization code to set up DICOM
December 11, 2008 02:56
Dear Sirs!
Please help me to get an authorization code (password) for my HDI-4000. I need to reconfigure IP address for DICOM - and it asks me for code. Can I reset the password to default if previous service engineer set custom one?Pleas help!:) Thanks!
to rate and post a comment
Ilia Davidov
Re: Philips HDI-4000 - need authorization code to set up DICOM
December 17, 2008 01:36
Let me answer myself :) I've found an authorization key via debugger - it is 'bothell'. So if you need to get a network settings on HDI 4000 - just go to SETUP (Press SETUP button) then DICOM, then Network Settings (or Configuration - I'm not sure) - then enter the 'bothell' - and the standard W2K Network Settings window appears. By the way, it's an ordinary Explorer, so you can put any location (e.g. C:\) in address bar and work with 4000 as on simple PC. Hope this info will become usefull for somebody :)
to rate and post a comment
Edson Barrios
Re: Philips HDI-4000 - need authorization code to set up DICOM
August 20, 2009 06:10
looking for service manual and oprator manual ATL hdi 4000.
Can you help??
to rate and post a comment
Ilia Davidov
Re: Philips HDI-4000 - need authorization code to set up DICOM
August 21, 2009 11:25
Please give me your E-mail, I'll send the service manual to you.
to rate and post a comment
Edson Barrios
Re: Philips HDI-4000 - need authorization code to set up DICO
August 21, 2009 05:36
Hi.
And very much thanks for helping.
I did not recive it yet. Please send it to:
dr.edson.barrios@gmail.com and or:
dr_edson_barrios@hotmail.com
Again thanks a lot.
Sincerely: Dr Edson Barrios.
to rate and post a comment
raheel nawaz
Re: Philips HDI-4000 - need authorization code to set up DICO
October 11, 2011 08:48
can you plz send me a copy of the philips Atl hdi 4000 service mannual
nwassem@gmail.com iwill be great full
regards
to rate and post a comment
Dan Hrituc
re: Re: Philips HDI-4000 - need authorization code to set up DICOM
November 29, 2012 02:55
Please send me the service manual for Philips HDI 4000 if you have.Thank you very much.
My e-mail dhritzuk@medical-electronic.ro
to rate and post a comment
carlos enrique salazar gea
re: Re: Philips HDI-4000 - need authorization code to set up DICOM
May 07, 2014 09:47
Could you send me a copy¿
csalazargea@hotmail.com
My equipment no booting.
Regards
to rate and post a comment