We have a Philips pulsera C-Arm with a problem, when it is power on, the following message appears on the screen "DFI application not started software inconsistent or not loadable". The system does not boot, it only displays the previous message and doesn't do anything else. In the C-Arm there are also two erroe messages. M379 Battery Overload self-activated and M050 Initialization Problem. I will appreciatte any ideasw about what is happening and what needs to be done. thank you.
Comprehensive medical imaging support. We supply essential parts & maintenance for most OEMs, buy/sell quality used equipment, and offer mobile rentals globally. Contact us: info@lasoimaging.com
Elias Valdes
Philips Pulsera
January 27, 2006 01:17
We have a Philips pulsera C-Arm with a problem, when it is power on, the following message appears on the screen "DFI application not started software inconsistent or not loadable". The system does not boot, it only displays the previous message and doesn't do anything else. In the C-Arm there are also two erroe messages. M379 Battery Overload self-activated and M050 Initialization Problem. I will appreciatte any ideasw about what is happening and what needs to be done. thank you.
to rate and post a comment
Umberto Sciunnach
Re: Philips Pulsera
January 27, 2006 07:52
you have a software problem and/or disk problem.
Let me know if you need od Disk whith software installed.
regards
uto
to rate and post a comment
Gustavo Polo
re: Re: Philips Pulsera
December 21, 2016 10:47
Hey Umberto, can you still offer assitance with Philips Pulsera? I have a unit with DFI issue
to rate and post a comment
Gustavo Polo
re: Philips Pulsera
December 21, 2016 10:47
I know this post is very old but did you find a solutions for this? I have the same issue with Pulsera.
to rate and post a comment