The site I visited to get a DICOM box working had an issue of no boot on the DICOM box. It was hanging up on CHECKSUM error. Had a replacement box i swapped out. I first tried to get my computer hooked up to the DICOM box to transfer imaged to E-Film, but that did not work. Under the remote devices tab, I added the Description, AE title, Host name or IP address and port. I set my computer to the static IP of their server. When I tried to send images, I would get a message on the DICOM remote stating Archive1 not connected. The IP of the archive server and the Worklist server were the same. I am very confused and could not get any local images sent to my laptop. The images transferred over to their network with no issues. Any ideas on what I miss?
Sell your scrap MRI magnets! Top prices, free shipping, and fast pickups. Don't let dust-collecting, idle assets go to waste. Contact: ryan.swiderski@cyclicmaterials.earth or call 437-826-1621
Phillips BV29 + DICOM
January 17, 2013 11:53
The site I visited to get a DICOM box working had an issue of no boot on the DICOM box. It was hanging up on CHECKSUM error. Had a replacement box i swapped out. I first tried to get my computer hooked up to the DICOM box to transfer imaged to E-Film, but that did not work. Under the remote devices tab, I added the Description, AE title, Host name or IP address and port. I set my computer to the static IP of their server. When I tried to send images, I would get a message on the DICOM remote stating Archive1 not connected. The IP of the archive server and the Worklist server were the same. I am very confused and could not get any local images sent to my laptop. The images transferred over to their network with no issues. Any ideas on what I miss?
to rate and post a comment