Good day everyone, i'm having trouble with some bad detectors, i want to know which detectors are bad to can replace it, if anyone can send me the service manuals, and how to enter in service mode..
re: Picker PQ 2000, Artifacts problems, Bad Detectors
May 02, 2018 09:54
Hello Rainner:
It is normally needed to have diagnostics enabled. Login as root, no password. Check this with the "rev" command. The bad channels can be visualized with the "dita" program. And they can be badlisted with "bad_dets" or the bad module(s) replaced outright. For details email me to alfredofuhr@gmail.com. Good luck
Rainner Lopez
Picker PQ 2000, Artifacts problems, Bad Detectors
May 01, 2018 01:29
Good day everyone, i'm having trouble with some bad detectors, i want to know which detectors are bad to can replace it, if anyone can send me the service manuals, and how to enter in service mode..
Best regards
rainner.lopez@hotmail.com
to rate and post a comment
Alfredo Fuhr
re: Picker PQ 2000, Artifacts problems, Bad Detectors
May 02, 2018 09:54
Hello Rainner:
It is normally needed to have diagnostics enabled. Login as root, no password. Check this with the "rev" command. The bad channels can be visualized with the "dita" program. And they can be badlisted with "bad_dets" or the bad module(s) replaced outright. For details email me to alfredofuhr@gmail.com. Good luck
to rate and post a comment
Borhan Kalash
re: Picker PQ 2000, Artifacts problems, Bad Detectors
June 12, 2018 08:38
you can use dita
it is not easy procedure
you can email me or whatsup me
bkalash71@yahoo.com
00963954444992
to rate and post a comment