Hello Rainner
Error code 601 means that the recon boards in the console are stopped. Check the LEDs on the boards. Remove additional AP or EB boards. Minimum configuration for an axial scan is SIF, one AP, one BP.
Good luck
HIGH QUALITY fully tested & refurbished systems to manufacturer specifications like new. Installation & service support worldwide. Parts & tubes in stock with warranty. Sales@Elsmed.com
Rainner Lopez
picker pq 2000 Error 601
May 20, 2018 03:17
hi everyone, i hope anyone can help me with that
601 - Stop hit while initializing for a scan. (operator changed her mind)
Refer to the ERP user's manual in the Diag manual for further details.
the CT throws this error when i try to do a pilot or a scan.
and sometimes the system throws the error 512.
thanks in advance.
rainner Lopez, Venezuela
email: rainner.lopez@hotmail.com
to rate and post a comment
Alfred65
re: picker pq 2000 Error 601
May 21, 2018 09:34
Hello Rainner
Error code 601 means that the recon boards in the console are stopped. Check the LEDs on the boards. Remove additional AP or EB boards. Minimum configuration for an axial scan is SIF, one AP, one BP.
Good luck
to rate and post a comment
Jody Rotenizer
re: picker pq 2000 Error 601
May 21, 2018 09:36
Have you cleaned the slip ring?
to rate and post a comment
rockbob
re: picker pq 2000 Error 601
May 21, 2018 05:59
clean the slip rings and brushes
to rate and post a comment
Borhan Kalash
re: picker pq 2000 Error 601
June 05, 2018 09:43
try reconstructing good rawdata
is image ok?
to rate and post a comment