Hello,
On a Planmeca XC X-ray unit the cycle sporadically does not get finished. When this happens there is an Error 84 registered. This happens roughly once every 10 exposures or so.
There is not much information about error 84, just "Tube power generator time out" in the service manual.
Did anyone experience having this error?
It looks like Power supply PCB problem, but can it be something else?
Thanks in advance.
BMI-PMI services nearly every make, model, and modality through our nationwide team of nearly 200 local service engineers. Flexible contracts, 24/7 remote monitoring, and ISO 13485 certification. www.brownsmedicalimaging.com / 800-701-9729
Ivo Ha
Planmeca XC error 84
January 23, 2023 10:32
Hello,
On a Planmeca XC X-ray unit the cycle sporadically does not get finished. When this happens there is an Error 84 registered. This happens roughly once every 10 exposures or so.
There is not much information about error 84, just "Tube power generator time out" in the service manual.
Did anyone experience having this error?
It looks like Power supply PCB problem, but can it be something else?
Thanks in advance.
to rate and post a comment
ZHANG DONG
re: Planmeca XC error 84
January 24, 2023 10:26
It looks like Power supply problem。
to rate and post a comment
Tibor Ivanszky
re: Planmeca XC error 84
January 24, 2023 10:27
Think about cables too.
to rate and post a comment
Ivo Ha
re: re: Planmeca XC error 84
January 24, 2023 03:05
Which cables do you have in mind? The ones between the power supply and the tube?
to rate and post a comment
Ivo Ha
re: re: Planmeca XC error 84
January 24, 2023 03:06
Which cables? The ones from the power supply PCB to the tube?
to rate and post a comment