I have a problem on the GE vivid 3 pro. a message appeared during operation. "Very high voltage, please switch off the machine". I put out the machine. but after she did not start. (Black screen with the indicator flashing), the central unit starts but nothing is displayed. after several handling on the CPU and memory cards and hard drive. the machine has finally restarted. but after 2 hours of operation the same message that appears "Very high voltage". When I wanted to reboot again, the app freezes on the windows 2000 home screen (the bar that indicates the progress of the start). and the complete system hangs. When I remove the Image Port Board or I unplug the laison between it and the PCI2IP card, windows starts normally (the app does not start and displays an error, it is normal since the card is disconnected). When I put back the link between the two cards the system does not start, or it hangs on the boot screen. Is it a power or card problem? thank you.
There are some green light blinking on the boards .if those light are not on it means you are with a faulty power board.check the power. Board or replace it .send your email to me so I can send the service manual to you
hello my friend, I can help you, because I went through this same problem and I solved it easily if you need help contact me
email: tom.jp.pb@gmail.com
Comprehensive medical imaging support. We supply essential parts & maintenance for most OEMs, buy/sell quality used equipment, and offer mobile rentals globally. Contact us: info@lasoimaging.com
Mohamed Kocht
Please HELP Vivid 3 Pro Problem
January 14, 2018 09:57
I have a problem on the GE vivid 3 pro. a message appeared during operation. "Very high voltage, please switch off the machine". I put out the machine. but after she did not start. (Black screen with the indicator flashing), the central unit starts but nothing is displayed. after several handling on the CPU and memory cards and hard drive. the machine has finally restarted. but after 2 hours of operation the same message that appears "Very high voltage". When I wanted to reboot again, the app freezes on the windows 2000 home screen (the bar that indicates the progress of the start). and the complete system hangs. When I remove the Image Port Board or I unplug the laison between it and the PCI2IP card, windows starts normally (the app does not start and displays an error, it is normal since the card is disconnected). When I put back the link between the two cards the system does not start, or it hangs on the boot screen. Is it a power or card problem? thank you.
to rate and post a comment
Adebayo Bamidele
re: Please HELP Vivid 3 Pro Problem
January 15, 2018 09:30
Check the voltage on the power and the light indicator on the image board ,if it lit red it is board failure
to rate and post a comment
Mohamed Kocht
re: re: Please HELP Vivid 3 Pro Problem
January 15, 2018 10:52
Thanks.. there is no light indicator work on the image borad.. and also on all other board.. (only flash when start machine)
to rate and post a comment
Adebayo Bamidele
re: re: re: Please HELP Vivid 3 Pro Problem
January 16, 2018 09:21
There are some green light blinking on the boards .if those light are not on it means you are with a faulty power board.check the power. Board or replace it .send your email to me so I can send the service manual to you
to rate and post a comment
Mohamed Kocht
re: re: Please HELP Vivid 3 Pro Problem
January 15, 2018 10:52
Hi Thanks.. all indicator on the image board and all other board no work only all indicator flash when machine start
to rate and post a comment
Adebayo Bamidele
re: re: re: Please HELP Vivid 3 Pro Problem
January 16, 2018 09:22
I can send service manual to you as a guild for the light indicator s
to rate and post a comment
Mohamed Kocht
re: re: re: re: Please HELP Vivid 3 Pro Problem
January 17, 2018 09:06
Thanks I have a service Manual.. i think that is a problem in th HV power supply
to rate and post a comment
mohamed72
re: Please HELP Vivid 3 Pro Problem
January 15, 2018 01:19
hi:
please how I can enter to reboot mode in vivid3
thanks
my email: mm541972@gmail.com
to rate and post a comment
Adebayo Bamidele
re: re: Please HELP Vivid 3 Pro Problem
January 16, 2018 09:21
Press Alt + del key at the same time
to rate and post a comment
WellingtonTrajano
re: Please HELP Vivid 3 Pro Problem
January 16, 2018 09:20
hello my friend, I can help you, because I went through this same problem and I solved it easily if you need help contact me
email: tom.jp.pb@gmail.com
wellington tajano
to rate and post a comment
Mohamed Kocht
re: re: Please HELP Vivid 3 Pro Problem
January 17, 2018 09:07
my email es med_kocht@outlook.fr .. i send you a message on your email
to rate and post a comment
Mohamed Kocht
re: re: Please HELP Vivid 3 Pro Problem
January 17, 2018 10:35
Waiting for your Help.. BIG THANKS
to rate and post a comment