i have a problem with the practix 300. it shows error message: "ma low" when i exposure even mAs is very low (about 2 mAs). We did autocalibrate of the tube but could not completed. I also checked filament board on other machine. it is good.
re: Re: Practix 300 philips: error message: ma low
December 17, 2013 05:46
HELLO
i have a problem with the practix 300. it shows error message: "BEAM FAUL" when i exposure even mAs is very low (about 30 mAs). I also checked WB POWER, NA auxiliary, tube and filament board. it is good.
know what is the internal configuration of the service cable for this equipment? since mine was lost me.
thanks would greatly appreciate your help to fix this problem.
re: Re: Practix 300 philips: error message: ma low
December 17, 2013 01:25
HELLO
i have a problem with the practix 300. it shows error message: "BEAM FAUL" when i exposure even mAs is very low (about 30 mAs). I also checked WB POWER, NA auxiliary, tube and filament board. it is good.
know what is the internal configuration of the service cable for this equipment? since mine was lost me.
thanks would greatly appreciate your help to fix this problem.
BMI-PMI services nearly every make, model, and modality through our nationwide team of nearly 200 local service engineers. Flexible contracts, 24/7 remote monitoring, and ISO 13485 certification. www.brownsmedicalimaging.com / 800-701-9729
Wo Thing
Practix 300 philips: error message: "ma low"
May 18, 2011 10:00
Hi all
i have a problem with the practix 300. it shows error message: "ma low" when i exposure even mAs is very low (about 2 mAs). We did autocalibrate of the tube but could not completed. I also checked filament board on other machine. it is good.
Please help me to fix this problem.
to rate and post a comment
thai tan
Re: Practix 300 philips: error message: "ma low"
May 18, 2011 12:21
maybe mainboard defective, you need calibrate and adjustment it. furthermore, you must check tube. please contact me
Thai 0914019608
to rate and post a comment
saju bhaskaran
Re: Practix 300 philips: error message: "ma low"
June 15, 2011 10:04
try tube
to rate and post a comment
Wo Thing
Re: Practix 300 philips: error message: "ma low"
July 22, 2011 10:45
Hi
i fixed this problem. E control board was died.
thanks
to rate and post a comment
sergio caballero
re: Re: Practix 300 philips: error message: ma low
December 17, 2013 05:46
HELLO
i have a problem with the practix 300. it shows error message: "BEAM FAUL" when i exposure even mAs is very low (about 30 mAs). I also checked WB POWER, NA auxiliary, tube and filament board. it is good.
know what is the internal configuration of the service cable for this equipment? since mine was lost me.
thanks would greatly appreciate your help to fix this problem.
to rate and post a comment
sergio caballero
re: Re: Practix 300 philips: error message: ma low
December 17, 2013 01:25
HELLO
i have a problem with the practix 300. it shows error message: "BEAM FAUL" when i exposure even mAs is very low (about 30 mAs). I also checked WB POWER, NA auxiliary, tube and filament board. it is good.
know what is the internal configuration of the service cable for this equipment? since mine was lost me.
thanks would greatly appreciate your help to fix this problem.
to rate and post a comment