Any one help me plz to fix a problem with Aloka SSD-2000.
The machine SSD-2000 hangs when starting up.
I think reloading the software on the machine EP-ROMs again will solve the problem, because the machine was OK.
I pulled out a board and turned on the machine, then I pulled in the board and turned on the machine again, but it hanged on the start up message.
Plz inform me how can I re-load the total datas stored on the machine EPROMs?
hi,
chek if the equipement has a flopy drive or a cd rom drive. if it does, you can directly load the software from there. otherwise, there must be a serial port to connect the laptop where the software can be loaded.
Comprehensive medical imaging support. We supply essential parts & maintenance for most OEMs, buy/sell quality used equipment, and offer mobile rentals globally. Contact us: info@lasoimaging.com
habib sheikhottayefeh
Problem on Aloka SSD-2000
April 30, 2009 04:50
Any one help me plz to fix a problem with Aloka SSD-2000.
The machine SSD-2000 hangs when starting up.
I think reloading the software on the machine EP-ROMs again will solve the problem, because the machine was OK.
I pulled out a board and turned on the machine, then I pulled in the board and turned on the machine again, but it hanged on the start up message.
Plz inform me how can I re-load the total datas stored on the machine EPROMs?
Regards,
Habib
HabibSheikh@irost.com
to rate and post a comment
DJIELA Flavien
Re: Problem on Aloka SSD-2000
May 07, 2009 12:08
hi,
chek if the equipement has a flopy drive or a cd rom drive. if it does, you can directly load the software from there. otherwise, there must be a serial port to connect the laptop where the software can be loaded.
to rate and post a comment
emad aly
re: Re: Problem on Aloka SSD-2000
January 20, 2014 05:00
can i get aloka ssd-2000 software
emadmekawy@gmail.com
to rate and post a comment