The problem on the Selena system is that after exposure the system came with a message "Data Base error encounter-Null This error requires restarting the Adquisition Station. Please call your local service representative to report error code 100". After hitting OK the systen restarts and after trying again with the with the same results. Any advice will be apreciate.
check the cables between the SUN computer and the gantry, disconnect and connect again, if it possible cross check by replacing the fiber optic board in the SUN computer.
check the log files, it may give some indications.
BMI-PMI services nearly every make, model, and modality through our nationwide team of nearly 200 local service engineers. Flexible contracts, 24/7 remote monitoring, and ISO 13485 certification. www.brownsmedicalimaging.com / 800-701-9729
Jorge Flores
Problem on Selenia Hologic
November 04, 2016 01:28
The problem on the Selena system is that after exposure the system came with a message "Data Base error encounter-Null This error requires restarting the Adquisition Station. Please call your local service representative to report error code 100". After hitting OK the systen restarts and after trying again with the with the same results. Any advice will be apreciate.
Best regards
Jorge Flores
to rate and post a comment
Cf
re: Problem on Selenia Hologic
November 07, 2016 10:35
I have a couple of checks to walk you through. 8059043635
to rate and post a comment
MRAdmin
re: Problem on Selenia Hologic
November 07, 2016 10:35
check the cables between the SUN computer and the gantry, disconnect and connect again, if it possible cross check by replacing the fiber optic board in the SUN computer.
check the log files, it may give some indications.
to rate and post a comment
Lenny Place
re: Problem on Selenia Hologic
November 07, 2016 10:40
Please send an email address
to rate and post a comment