Hi everybody
I have a problem with a siemens viva. When I press the MAGNET ON switch, the contactor will click and then trips. It will not hold. But if I press the MAGNET ON switch and Keep it PRESSED for about TEN SECONDS the MAGNET STOP LED slowly goes off and the magnet ramps up. Then the system works fine and we can scan the patient for whole day.
I have only one bad transistor in magnet power supply.
Any help is appreciated.
Muhammad Faisal Imtiaz
problem with a siemens viva
April 19, 2009 06:12
Hi everybody
I have a problem with a siemens viva. When I press the MAGNET ON switch, the contactor will click and then trips. It will not hold. But if I press the MAGNET ON switch and Keep it PRESSED for about TEN SECONDS the MAGNET STOP LED slowly goes off and the magnet ramps up. Then the system works fine and we can scan the patient for whole day.
I have only one bad transistor in magnet power supply.
Any help is appreciated.
to rate and post a comment